Mosley Massaging Zero Gravity Adjustable Bed with Wireless Remote

Features

• Minimum leg height king size: 3"
• In between leg height king size: 7"
• Maximum leg height king size: 10"
• The head tilt is approximately 70 degrees. The foot raises approximately 40 degrees.
• This item will fit inside a headboard/footboard with side rails.
• The bed can be powered by plugging it into a Type-A plug wall outlet.
• The bed has 1 head motor, 1 foot motor, and 2 massage motors.
• This base is not compatible with a king-of-wheel kit.
• The bed comes with 6 multi-sectional legs. You could raise the bed another 3 " by using all 3 sections.
• The zero-gravity position is achieved by lying on your back and raising your legs and head above the level of your heart.
• Zero-Clearance Design
• Backlit Remote
• Leg height when reclined up: 15"
• Recommended maximum mattress thickness: 14"
• Each leg with all three segments connected is 11 1/2" tall.
• The clearance underneath the table is about 15.4"
• Shortest leg height achievable (applies to all of the bed sizes): 4"
• From the floor to the bottom of the frame: 10"
• Shortest the bed can be off the ground for the full-size option: 8"
• Minimum compatible mattress thickness: 8"
• The motors hang approximately 4" from the underside of the bed frame.