Conversion Kit Kegerators Under $250

This commercial-quality thermoplastic super vinyl beverage hose exceeds all the rigorous demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures. Quality vinyl will not rot, swell, or dry out and is unaffected by normal cleaning compounds.

This 630SS stainless faucet and stainless steel beer shank setup allow the beer to only touch stainless steel. Forward sealing stainless steel faucet features a sealing design that seals the faucet near the spout end of the faucet, not at the rear like most other designs. This means there is less faucet area exposed to keep clean, and that area is easier to clean. The stainless steel beer shank has a bore and an id stainless hose nipple. Conventional wisdom has no place at perlick. That's because the drive for innovation is legendary, leaving convention for the other guys to play with. Now, wisdom in general... Well, that's another story. The new perl stainless faucet from perlick is a classic example. Its revolutionary perl ball and floating o-ring design eliminate the need for a valve shaft. Beer gets no exposure to air; there's literally no space for mold and bacteria to grow. The perl faucet has fewer internal parts for better reliability. A shank is used to attach a beer line to a faucet. The shank is mounted through a wall, refrigerator door, cabinet, etc. The shank comes with a black flange on the front and a compression ring on the back. The compression ring is used to secure the shank to the mounting surface. All shanks come fitted with a stainless tail piece for beer line connection.

The KT85-MFL is the ideal coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs. It features 1/4" MFL fittings for both the gas in and beer out, so you don't have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different type of coupler. Simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.

Kegco's polished stainless steel draft beer tower features taller than most standard draft beer towers, giving you enough space to fill normally hard-to-fit growlers and pint glasses. It comes complete with two stainless Infinity faucets with stainless levers and ABS plastic faucet knobs. This tower uses 100% stainless steel metal components to help ensure better-tasting beer. This tower comes complete with two preassembled brewery-approved beer hoses with hex nuts and neoprene washers and is compatible with all standard keg couplers. A mounting gasket and four screws are included for easy mounting. The Infinity Series standard beer faucet boasts an elegant curved design and stainless steel finish that elevates the look of any kegerator. The stainless steel construction resists corrosion and is less susceptible to wear and tear. The sanitary stainless steel faucet will not impart unwanted flavors, making this tower ideal for dispensing beer, wine, cold brew coffee, soda, sparkling water, and kombucha.

Now I can have 2 flavors!. Michelle. Redmond, OR. Thu Nov 09 2023

Polished stainless steel 1-tap all stainless contact quick disconnect homebrew tower is designed with the homebrewer in mind! It includes quick disconnect MFL fittings that allow you to easily connect and disconnect the beer line from a homebrew coupler and features 100% stainless steel contact components to ensure the purest taste for your home brewed beer. The tower's extra-tall gives you enough space to fill normally hard-to-fit growlers and pint glasses. This tower comes with one stainless steel faucet with stainless steel lever, one black abs plastic faucet knob, one brewery-approved beer hose, one swivel nut set, and one stepless clamp. A mounting gasket and four screws are also included for easy mounting.

Brewery approved beverage hose. This thermoplastic vinyl hose meets and exceeds all the rigid demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures. It will not rot, swell, or dry out and is unaffected by normal cleaning compounds.

Polished stainless steel 2-tap all stainless contact quick disconnect homebrew tower is designed with the homebrewer in mind! It includes quick disconnect MFL fittings that allow you to easily connect and disconnect the beer lines from your homebrew couplers and features 100% stainless steel contact components to ensure the purest taste for your home-brewed beer. The tower's extra-tall height gives you enough space to fill normally hard-to-fit growlers and pint glasses. This tower comes with two stainless steel faucets with stainless steel levers, two black ABS plastic faucet knobs, two brewery-approved beer hoses, two swivel nut sets, and two stepless clamps.

This complete direct draw kit includes everything you need to pressurize and tap a D system keg. It's the perfect addition to a commercial kegerator that does not include the dispense components and can be paired with a jumper line to connect to and serve from a jockey box. It includes an empty 10 lb. aluminum CO2 tank, commercial grade double gauge regulator, US lever handle D system keg coupler, air line assembly (air tubing, and two plastic air lines clamps), and neoprene washer.

With the deluxe two keg tower kegerator conversion kit, you can transform a plain compact refrigerator or chest freezer into your very own draft beer dispenser, complete with a stainless steel draft tower with two faucets and plenty of exciting professional-level features that allow you to enjoy your favorite cold beverage with ease! Drawing on years of beer dispensing experience has designed a conversion kit that includes all of the high-quality commercial-grade parts you'll need, from the NSF-approved American D-system keg couplers to the commercial-grade two-product dual gauge regulator. We've even included a stainless steel drip tray to contain any drips or spills, so clean-up is a breeze! This kit has been designed to dispense two separate kegs. This NSF-approved air-cooled stainless steel draft beer tower with two chrome-plated brass faucets is an excellent choice for two product draft beer dispense systems! It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two I.D. beer lines extend from the bottom of the tower. Durably constructed to deliver a consistent flow pour after pour, this two-product commercial grade dual gauge regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Includes a y splitter and two independent shut-off valves for dispensing up to two kegs at the same keg pressure. This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg. Designed with style and convenience in mind, this drip tray is constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult.

The Kegco YH-76S-4 Commercial Grade Four Gauge Secondary Regulator delivers exceptional performance, designed to withstand the demanding conditions of bars and restaurants. Perfect for dispensing from multiple kegs off the same CO2 tank at different pressures, this regulator ensures smooth, reliable operation every time. It features a built-in shut-off valve and pressure adjustment knob, and can be easily mounted to a wall or the inside of a refrigerator for added convenience. Kegco durable construction guarantees consistent flow with every pour. The T-style adjustment valve allows for precise pressure control, even when the regulator is cold. Four individual gauges display the CO2 pressure inside the kegs, while the pressure release valve is conveniently located for easy access. For optimal performance, this secondary regulator requires a primary regulator with one output, connected via an air line.

This polished stainless steel draft beer tower comes with two matching Perlick faucets. It is taller than most draft beer towers, giving you enough space to fill up your growler or pint glasses. The draft beer tower is compatible with all standard keg couplers and can be easily mounted using the included gasket. The Perlick stainless steel beer faucet is the most sanitary faucet available anywhere. Its innovative seat-forward design keeps internal parts from being exposed to air, preventing the handle lever from sticking and minimizing bacterial build-up. This revolutionary design and stainless steel body ensure a brewery fresh taste. In combination with the stainless steel tower shanks, your beer will only touch stainless steel metal components with this tower.

Take the guesswork out of building your own kegerator with a standard homebrew kegerator conversion kit, which includes everything you will need to successfully convert a kegerator or freezer into a homebrew beer dispenser. Made up of high-quality commercial-grade parts that have been designed and built to last, this kit includes convenient features like a dual gauge regulator for monitoring both output pressure and co2 volume and ball lock couplers to dispense cornelius pepsi kegs. It also includes a beer faucet, shank, empty 5 lb. aluminum co2 tank.

Kegco's polished stainless steel draft beer tower features taller than most standard draft beer towers, giving you enough space to fill normally hard-to-fit growlers and pint glasses. It comes complete with three stainless Infinity faucets with stainless levers and ABS plastic faucet knobs. This tower uses 100% stainless steel metal components to help ensure better-tasting beer. This tower comes complete with three preassembled brewery-approved beer hoses with hex nuts and neoprene washers and is compatible with all standard keg couplers. A mounting gasket and four screws are included for easy mounting. The infinity series standard beer faucet boasts an elegant curved design and stainless steel finish that elevates the look of any kegerator. The stainless steel construction resists corrosion and is less susceptible to wear and tear. The sanitary stainless steel faucet will not impart unwanted flavors, making this tower ideal for dispensing beer, wine, cold brew coffee, soda, sparkling water, and kombucha.

From the very first pour to the very last drop, this ultimate conversion kit has everything you'll need to successfully transform a refrigerator or freezer into a high-performance keg beer dispenser - beer not included! It features high-quality components that have been designed and built to last, like an NSF-approved commercial grade dual gauge regulator and ball lock keg couplers for use tapping Cornelius Pepsi kegs. Once you've begun dispensing delicious homebrew beer from your new kegerator, you can easily keep it clean and running smoothly thanks to the included stainless steel dray, 32 oz. bottle of line cleaner, 16 oz. bottle of star san sanitizer, and faucet brush.

This is a commercial-grade single faucet chrome-plated metal draft beer tower with a column. This is the same tower that is found on all commercial grade kegerators such as true and beverage-air. This tower comes complete with a chrome-plated faucet and clear beer tubing that ends in a nozzle and hex nut assembly that connects to all standard keg couplers.

The Kegco SEDP-106 is an all stainless steel door mounted drip tray. This drip tray is 10" wide and is mounted to do the door through two screw holes on the backsplash. There is no drain on this drip tray, so it will have to be manually emptied. This drip tray is popular due to its clean design and durability. The top vent comes off for easy cleaning.

Specially designed with 100% stainless steel contact components, this NSF-approved double faucet diameter polished stainless steel draft tower comes complete with two Perlick 650ss stainless steel flow control faucets and two clear beer tubing with nozzle and hex nut assemblies. The ultimate in style and sanitation, this draft beer tower is compatible with all standard keg couplers and is safe to use with draft beer, wine, kombucha, and iced coffee dispense systems. This draft beer tower includes two Perlick 650SS stainless steel flow control faucets, which have an all stainless steel construction that helps make them one of the most sanitary faucets on the market today. These faucets also feature Perlick's revolutionary seat-forward design, which keeps internal parts from being exposed to air to minimize bacterial build-up and prevent the lever handle from sticking. Flow control faucets have a special flow control handle that allows you to adjust the restriction for hard-to-pour brands, reduce the amount of foam when pouring into a frosted glass, and slow the flow when pouring sampler glasses, flights, and growlers.

From assembling your very first piece to cleaning up after your very last pour, is with you every step of the way with the ultimate two-tap door mount ball lock homebrew kegerator conversion kit. Made up of superior quality commercial-grade parts like a dual gauge regulator and ball lock keg couplers, has thought of everything you'll need to convert a refrigerator or freezer into a high-performance two-product homebrew beer dispenser that has been designed and built to last. We've even included a stainless steel drip tray for easy clean-up and a 32 oz. bottle of beer line cleaner, 16 oz. bottle of star san sanitizer, and a faucet brush to keep your dispense system squeaky clean between kegs. Just follow the simple detailed instructions that are included in each kit, and before you know it you'll have a quality kegerator that can dispense up to two kegs of delicious home-brew beer.

The add-a-tap conversion kit comes with the beer parts you'll need to successfully add an additional tap to your draft beer dispenser. Turn your single tap kegerator into a multi-tap kegerator with this easy-to-install kit, which includes a beer faucet, a keg coupler, and all of the lines and fittings you need. The standard chrome beer faucet is the most commonly used faucet in the industry. The lever handle "D" system beer coupler is compatible with all domestic brand kegs. All of the draft beer parts are the highest commercial-grade quality and are designed and built to last.

Kegco's polished stainless steel draft beer tower features taller than most standard draft beer towers, giving you enough space to fill normally hard-to-fit growlers and pint glasses. It comes complete with three stainless Infinity faucets with stainless levers and ABS plastic faucet knobs. This tower uses 100% stainless steel metal components to help ensure better-tasting beer. This tower comes complete with three preassembled brewery-approved beer hoses with hex nuts and neoprene washers and is compatible with all standard keg couplers. A mounting gasket and four screws are included for easy mounting. The infinity series standard beer faucet boasts an elegant curved design and stainless steel finish that elevates the look of any kegerator. The stainless steel construction resists corrosion and is less susceptible to wear and tear. The sanitary stainless steel faucet will not impart unwanted flavors, making this tower ideal for dispensing beer, wine, cold brew coffee, soda, sparkling water, and kombucha.

This product has a bold design with elite functionality. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank at different pressures. The secondary regulator has its own manual pressure release valve, internal pressure release valve that releases pressure at 55-65 PSI, and large pressure adjustment knob, and can be mounted to a wall or the inside of the keg refrigerator. In order to use this secondary regulator, you will still need a primary regulator with one output that connects to the secondary using a piece of the airline. The LHU5S-1 has a single 0.31" barb and a single gauge that indicates how much CO2 pressure is inside of the keg.

Polished stainless steel 3-tap all stainless contact quick disconnect homebrew tower is designed with the homebrewer in mind! It includes quick disconnect MFL fittings that allow you to easily connect and disconnect the beer lines from your homebrew couplers and features 100% stainless steel contact components to ensure the purest taste for your home-brewed beer. The tower's extra-tall gives you enough space to fill normally hard-to-fit growlers and pint glasses. This tower comes with three stainless steel faucets with stainless steel levers, three black ABS plastic faucet knobs, three brewery-approved beer hoses, three swivel nut sets, and three stepless clamps.

The kegerator is NSF approved to consistently deliver peak performance even in rigorous commercial environments. Its sturdy construction ensures consistent flow pour after the pour and it features a T-style adjustment valve which makes it easy to adjust the pressure inside the keg. The single gauge on the regulator indicates how much CO2 pressure is inside the kegerator and a pressure release valve is conveniently located on the regulator body.

Quick delivery and item works!. Courtney. Fort Totten, ND. Sun Sep 13 2020

The double faucet tall polished brass draft tower comes equipped with two matching brass stout faucets and two lengths of clear beer tubing with nozzle and hex nut assemblies. Featuring two specially designed stout beer faucets, this draft tower is the perfect tower for pouring a smooth, creamy glass or cold-brewed coffee. These stout faucets have restricted spouts with tiny discs that help slow down your pour to allow your beer or coffee to achieve a cascading head and smooth mouthfeel, and the restrictor discs can be removed if you need to dispense regular draft beer. The tower is allowing enough air circulation to help maintain the draft beer temperature. This polished brass tower is longer than most standard towers giving you more than enough space to fill up your pint glass or growler. This draft beer tower is compatible with all standard keg couplers. This tower comes with two sleek black faucet knobs and a gasket with four screws for easy mounting.

It's never been easier to dispense both store bought beer and your own home brew off of the same system. This Sankey to ball lock keg coupler liquid post adapter allows you to switch your beer line between commercial kegs and Cornelius home-brew kegs in seconds. It's as simple as screwing the conversion fitting onto your Sankey coupler and then installing your liquid-out ball lock coupler on the post. If you want to make use of both sides of your Sankey coupler ball lock, you will also need a gas post.