Mold Blocking Primer is an EPA-registered protective coating that can be used to paint over all existing mold, mildew, fungi, and odor causing bacteria and any other fungal organisms.

For updating and coordinating household appliances. Durable, scrubbable and colorfast. Resists household cleaners. Stain, grease, and grime-resistant. For use on refrigerators, microwaves, dishwashers, trash compactors, washers/dryers, file cabinets, cupboards, counters and desks. Dries to the touch in 30 minutes.

Penetrating oil-based stain. Penetrates, stains, and seals in one application. Will not raise the grain of the woof. Coverage 125 - 150 square feet per quart.

Solvent-free spreadable epoxy that is ideal for repairing fine cracks, splits, gouges, nail holes, etc. in architectural wood components. Similar to SculpWood Putty but spreads like spackle. The soft, buttery consistency is easy to mix and work. Easy to sand when cured and will not shrink, crack or become brittle. Has a superiors bond to most substrates including wood, fiberglass, ceramic, brick, concrete and steel. It is 100% waterproof and safe for interior/exterior use.

Scotch Masking Tape for Production Painting helps provide strong adhesion and holding power. It is specially designed for use on non-damageable surfaces. Sticks easily to the surface and helps resist tape lifting or curling/helps reduce labor. Will function up to 150 Degrees F for up to 1 hour. Resists paint bleed-through/helps reduce rework.

A beautiful, clear, protective finish for wood and metal. Ideal for interior wood surfaces. Can be used over bare or stained wood. Dries to the touch in 30 minutes, can be recoated after 2 hours. No sanding needed between coats. Acts as its own sealer, but can be applied over Minwax Lacquer Sanding Sealer for added smoothness.