The Armacost Lighting RibbonFlex Home Dim to Warm LED Tape Light Kit is a perfect all-around solution for any kitchen, bedroom or living room installation. At full brightness, the LED strip light kit’s color temperature is Soft-Bright (3000K). When the LED kit is dimmer, the color temperature transitions to a Warm-White (1800K) glow. The lighting kit features an RF (Radio Frequency) remote that allows control of dimming and LED lighting effects. Control up to three kits with a single remote for larger, custom installations. Cannot be used with AC dimming switches.
At 3000K the color temperature of these LED lights is ideal—it’s slightly yellow, so it blends well with my incandescent bulbs, and it’s better than hideous florescent lights. As the lights are dimmed, they get more yellow. The remote is very handy for turning on and dimming; there are 4 levels with individual buttons (100%, 50%, 25%, and 10%), and there also are up/down buttons for more steps in between and below 10%. So many steps for an LED light is unusual—and great. I'm not sure why, but there are also flickering/light pattern options. The power pack on the cord has two holes so that you can screw it into place, which is nice. After installation, some areas of the self-adhesive strip were sagging and needed to be pressed back. If it continues, I expect I’ll need a little glue to keep it in place.. Savannah. San Francisco, CA. Wed Mar 17 2021