Kit# 5 Luxury shower surrounds for the DIY enthusiast in pre-cut kits for common shower wall sizes. These panel panels are lightweight and easy to carry, cut, and fabricate. Cutting can be done with a skilled saw, angle grinder, jigsaw, etc. To fabricate you can use a Dremel tool, miter, etc. We suggest using Locktite PowerGrab Ultimate adhesive or Boss 125 adhesive to adhere panels to the walls but compatibility with the other substrates might need testing. We suggest using 100% clear silicone to glue the trim to the panels. We suggest applying the adhesive to the panel and applying circle blobs of caulking about 6”-8” apart throughout the sheet. We also suggest applying 100% silicone, about a ¼” continuous bead around the panel's outside edges to ensure a good edge seal and prevent moisture or debris from getting behind the panel.