Linen Avenue Cordless Cellular Top Down Bottom Up Light Filtering Shade Dark Grey (Arrives 1/4" Narrower)

Features

• Child And Pet Safe: Each shade has a Smooth cordless operation that conforms to CPSC child safety guidelines. Hardware: End caps, simple snap-in top mount brackets, and mounting hardware are included. Headrail size: 1 5/8 High and 1 7/8 Deep (2 3/16” Deep with bracket).
• For Inside Mount: Measure your window horizontally with a steel tape measure in three places; top, middle, and bottom, use the smallest measurement, rounding down to the nearest ¼ inch. This will ensure the raising and lowering of the shade in the window frame.
• For Outside Mount: Measure your window horizontally with a steel tape measure in three places; top, middle and bottom. Using the LARGEST measurement, add 2 to 4 inches and order this width. This will allow for an overlap on each side of the window to provide privacy. You may want to add to the height for overlap as well. For example, if the largest measurement is 36 inches, we suggest ordering 40 inches as the width.
• Our shades offer sound absorption and provide a privacy factor of 4 out of 5. These are not blackout shades, they will allow light to filter into the room.
• PLEASE READ THE IMPORTANT INFORMATION ABOUT SIZING YOUR CORDLESS CELLULAR SHADE BELOW. Your shade will arrive with a 1/4 deduction. The minimum depth required to install the inside mount is 2 inches.
• For INSIDE MOUNT: If you would like to install the shade INSIDE of the window frame, measure horizontally, at the top of your window sill. Using the measurement, round down to the closest size. Your shade will arrive with a 1/4" deduction, to ensure a perfect fit. If you would like to install it inside of the window frame, your window sill must be at least 2" deep.
• For OUTSIDE MOUNT: If you would like to install your shade OUTSIDE of the window sill, measure in the same place. Using the measurement, we recommend adding 4 to 5 inches to the width and length, to ensure full coverage. Your shade will arrive with a 1/4" deduction.
• For additional information on sizing, please refer to our How to Measure and Order video. https://www.youtube.com/watch?v=SpfdAy7AMnA
• HARDWARE: End caps, simple snap-in top mount brackets, and mounting hardware are included. Headrail size: 1 5/8 High and 1 7/8 Deep (2 3/16” Deep with bracket).
• Feel free to email us at [email protected] if you need assistance.
• PLEASE READ THE IMPORTANT INFORMATION ABOUT SIZING YOUR CORDLESS CELLULAR SHADE BELOW. Your shade will arrive 1/4 inch narrower than what you order. The minimum depth required to install the inside mount is 2 inches.