RC Upholstered Recliner, Gray Genuine Leather

At a Glance

Manual Push Back Recliner

Position Lock

Seat Height - Floor to Seat: 20.5 ''

Seat Width - Side to Side: 22 ''

About This Product

Tailored and timeless, the Kerley Push Back Recliner is an instant casual classic. The Kerley is covered in the luxurious Sarzana Fortress finished top-grain leather with nailhead trim around the arms, base, and sides.

Features

Dark wood finish
Overall product dimensions are 29.5" W x 38" D x 42.5" H
Nail head trim
Traditional/ formal design suitable for most decor styles
Features nailhead trim design for added flair
Dense foam core wrapped in virgin polyester ensures soft comfort and nice crown look
Formal design
Manual recline feature provides added convenience and ease of use
Frame construction: Kiln dried, laminated, and select hardwoods that are precision machined for fluid and consistent shape.
Padding: Pattern-cut urethane foam that is padded with felt polyester fibers, assuring the important qualities of comfort, loft, resilience, and good recovery.
Seat: A highly resilient, high-density foam core wrapped with virgin polyester fibers, assuring luxurious comfort and a pleasing crown appearance. This is then covered with a special ticking for pillow-soft comfort.
Seat back: Filled with precision cut foam and highly resilient polyester fibers or filled with 100% virgin polyester fibers enclosed in a special ticking for pillow-soft comfort.
Distance from wall to recline: 20".
Volume: 18.44 cu ft (0.5 m3)

Product Dimensions

Other Dimensions

Seat: 20.5'' H X 22'' W X 20.5'' D
Full Reclined: 66'' D
Arms: 25'' H
Overall Dimensions: 40.5'' H X 39.5'' W X 38.5'' D
Overall Product Weight: 90 lb.
Required Back Clearance to Recline: 18''
Minimum Door Width - Side to Side: 43.5'' W
Back Height - Seat to Top of Back: 20'' H

Details

Upholstery Material: Top Grain Leather
Position Type: 2-Position
Recliner Base Type: No Motion
Legs Included: Yes
Chair Design: Club Recliner
Frame Material: Metal, Solid Wood, Plywood, Solid Wood;Plywood;Metal
Wood Species: Walnut
Leg Material: Wood
Seat Construction: Sinuous Springs
Fill Material: Foam, Polyester
Back Fill Material: Foam, Polyester
Heated: No
Accent Pillow Included: No
Foam Density: 1.9 lbs./cu. ft. and over
Cushion Construction: Foam
Fabric Care Instructions: S: Spot clean with dry, solvent-based cleaner
Main Wood Joinery Method: Half-Lap
Made to Order: Yes
Imported: Yes
Weight Capacity: 300 lb.
Adjustable Components: Footrest
Reclining Mechanism: Manual - Push Back
Level of Recline: Partially
Removable Cushion Cover: No
Leg Color / Finish: Dark Wood
Motion Functionality: Manual
Product Care: Wipe spills immediately with a clean cloth or sponge. For spots or stains and daily cleaning, clean with mild non-detergent soap. Rinse well, gently wipe off, and allow to air dry. Cleaning butter, oil, or grease from leather: Wipe leather with a clean cloth, and leave it alone. The oil will be absorbed by the leather. Do not apply water. Also, do not use saddle soap, cleaning solvents, furniture polish, oils, varnish, abrasive cleaners, ammonia, or any other type of chemical solution. We recommend dusting frequently with a clean, soft, dry, lint-free cloth. Clean the surface by rubbing in the direction of the grain. We recommend polishing your furniture approximately every six months, using a clean, soft, lint-free cloth, and rubbing the polish in the direction of the grain. Some of our products feature a high-gloss finish. These items require extra care to prevent dust and smudges from being overly apparent. Be especially careful to avoid scratching high gloss finishes by using a feather duster or very soft, clean cloths and wiping with minimal pressure.
Position Lock: Yes
Arm Style: Straight
Leather Match: Yes