Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1/32” to 5/8” (1 to 15 mm) joints. For virtually all areas of application, indoor and outdoor floors and walls, also rated for pool and steam environments. Product with ultra-low emission of volatile organic substances (VOC) the ZHERORISK formulations provides an innovation which are safer for the installer, the jobsite and have no transportation or environmental negatives like all of the other epoxy grouting products. Innovative new approach to Epoxy Mortar that enables a smoother matt finish. Epoxy Elite EVO is a commercial product that can be used as a non-sag setting material and grouting product. Extremely easy to install and maintain (follow specific instructions for this product). 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together at room temperature will have a full 60 minutes of application and cleaning time, and forms a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical and chemical resistance. The grout is industrial grade performance even when subjected to enzymatic cleaners and other harsh environments. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.