Midwest Pets Universal Crate Casters (2 Pack) - 44-1P

Even installed properly, these casters are too flimsy for a big crate with a big dog (85 pounds).

As long as I breed big dogs I will never do without this wheels. I have 6 dogs that are any where from 90 lb to 105lb and they sleep in a 24 X 32 X 48 crates it now takes about 10 min to clean there room. If one of my dogs wants to stay in for a while I just roll her right out of the was to clean.

makes the crate so much easier to use

Putting these on the crate was like hanging upside down and suturing overcooked macaroni behind my back. Screws were too short to use the lock washer, and the wheels do not move easily. It scrapes on the laminate floor when I move it. Of all the stuff I have bought from Wayfair, these are the biggest disappointment.

Works very well

on a large crate for my diox mix puppy.to heavy to carry now just roll it were i want it.took awhile to put on only bad thing.

Product Review

If you don't mind having them on all the time, these universal crate casters are a great economical alternative to the wagon-style wheeled platform offered by the manufacturer of our 2 dog crates, and less bulky to travel with. Once installed, they lock into position easily, and wheel well even over carpet. Be sure to buy multiple sets (2 or more) of 2, depending on the size of your crate. Suits our needs perfectly! (4.5 stars)

Service Review

Timely delivery. Product packaging was bent and could have been better protected, though casters were undamaged.

These casters install easily and lock easily when the crate is wheeled to its location. They work great to use the same crate in different rooms over hard-surfaced floors and low-napped carpeting. The locks are effective. The pads for mounting the base of the casters to the wire on the bottom of the crate are nicely designed to fit the wires running across and down the length of the crate, allowing them to be mounted securely to the crate. The only bad thing was the quality of the hardware (machine screws, washers & nuts). Some of the screws were different lengths and did not fit the nuts because the threads were bent. One of the screws was a flat-head screw that didn't match the others and did not fit the design.