Features:

• Large integral fuel tank
• Overspeed shutdown
• Extra large access doors
• Manual or automatic start
• Available with or without the trailer
• High water temperature shutdown
• Overcrank lockout
• Battery included
• Voltage Selections: Three-position switch, no reconnection required
• Low oil pressure shutdown
• Fuel water seperators
• Single point lifting eye

Specifications:

Engine Specifications:

• Engine: John Deere
• Model: 4024TF270
• Cylinders: 4
• Induction System: Turbocharged
• Displacement (Liters/Cu. In.): 2.4/149
• Hp @ Rated Speed: 48
• RPM: 1800
• Bore and Stroke: 3.4" x 4.1"
• Oil Capacity (with filter): 8.5 quarts
• Cooling: Liquid
• EPA Emmisions Level: Tier 2
• Battery minimum cold cranking amps (supplied): 675

Standby Output:

• 3 ph @ 480 Volt (kVA/kW): 25/20
• 3 ph @ 208 or 240 Volt (kVA/kW): 25/20
• 1 ph @ 240 Volt (kVA/kW): 18/18

Prime Output:

• 3 ph @ 480 Volt (kVA/kW): 23/18
• 3 ph @ 208 or 240 Volt (kVA/kW): 23/18
• 1 ph @ 240 Volt (kVA/kW): 18/18

Voltage Selections:

• Voltage 3 Ph Adjustable: 208/220/240/416/440/460/480
• Voltage 1 Ph Adjustable: 120/127/139/240/254/277
• 3-Phase Power Factor: 0.8
• Voltage Regulation: 1/2%
• Frequency: 60 Hz
• Total Harmonic Distortion: <5%
• Insulation Material: Class H

Amperage (Prime):

• 3 ph @ 480 Volt: 27.1
• 3 ph @ 240 Volt: 54.1
• 3 ph @ 208 Volt: 62.5
• Single phase amperage @ 240V/120V: 75/75

Receptacle Specifications:

• 120 Volt 20 Amp Duplex GFCI: 2
• 120/240 Volt 50 Amp CS6369 Twistlock: 2
• Two Wire Remote Start Capability: Standard

Fuel System Specifications (Diesel):

• Fuel Consumption GPH-1/2 Load/(full load): 1.0/(2.1)
• Approximate Run Time (Hours) 1/2 load/(full load) @ Standby Rating: 50/(24)
• Fuel Capacity (Ga.): 50

Capacity and Dimensions:

• Sound Level dBA (Avg.) @ 7 meters, full load: 67
• Dimensions (LxWxH) with trailer: 131" x 62" x 72"
• Dimensions (LxWxH) without trailer: 74" x 38" x 52"
• Weight without Fuel (lbs): 2560
• Weight without Fuel and without Trailer (lbs): 2085

• Warning: Do not connect generator to any building's electrical system unless a disconnect switch has been installed. Follow local and national electrical codes for proper installation.