The DS600 is our premium, full house salt-free system specifically designed for the prevention of limescale on pipes, fixtures and appliances, sequestering iron, and the removal of chlorine, chloramines, trihalomethanes (THMs), tetrachloroethylene, VOCs, tanins, sulfur, rust, sediment and more. Our systems do not demineralize or introduce salt into your water. Instead, we utilize a food grade, scale prevention media that prevents hard water minerals from creating scale, removes existing buildup, and provides an anticorrosive layer to protect pipes and appliances. Our housing incorporates an integrated head assembly and is manufactured with a 125 PSI maximum operating pressure for both residential and commercial use. It utilizes our 5 micron carbon impregnated pleated cartridge for the first stage and our 5 micron, radial flow catalytic carbon cartridge as the second stage. Both cartridges have our proprietary scale prevention media designed to prevent and remove harmful scale build up. This wall mounted unit is designed to be installed at the water main entry point and will provide a flow rate of 18 gallons per minute (GPM). The standard inlet and outlet connections are 1” NPT and has a design pressure of 125 PSI with a maximum operating temperature of 113°F (45°C).

The DS220 is a two-stage, salt-free, point-of-entry system (full house) specifically designed for the reduction of chlorine, sediment and limescale accumulation on pipes, fixtures and appliances. Our systems do not demineralize your water and do not introduce salt into your water. Instead, we utilize a salt-free scale prevention media that prevents hard water minerals from creating scale, removes existing buildup and also provides protection against corrosion caused by chlorides, silica and iron. Our high-pressure housing is NSF certified and features an integrated head manifold. It utilizes our 5 and 1 micron, coconut carbon blocks which includes our proprietary scale prevention media designed to prevent and remove harmful scale build up, remove chlorine, chloramines, rust particles, dirt sand, volatile organic compounds (VOCs) and other impurities from your water. This wall mounted unit is designed to be installed at the water main entry point and will provide a flow rate of up to 14 gallons per minute (GPM). The standard inlet and outlet connections are 3/4” NPT and has a design pressure of 125 PSI with a maximum operating temperature of 113°F (45°C).

The Aquasure AS-SE-LITE650A is made up of 4 individual systems that provide the best quality water for the entire family. The AS-FS-25SCZ Triple Purpose Pre-filter helps remove larger particles and chemicals that may be harmful to your home and family. The AS-HS34A whole house water softening system is built to provide soft, scale, and spot-free water for the entire house. The Aquasure AS-PR75A reverse osmosis drinking water filter offers exceptional performance in water contaminant rejection and produces refreshingly clean, pure, deliciously tasting drinking water.

Designed for over 2,000 square feet, the AQFS234l jumbo salt free water softener and filter system is a proven approach to treating hard water. By combining a natural, scale prevention media with powerful carbon block filtration, this all-in-one system will prevent limescale from forming in your pipes, fixtures and appliances while eliminating chlorine odor and taste. In addition, the healthy minerals your body needs are not removed or replaced with salt. Now you can have clean, great tasting water without the salt, cost, and hassle. This system utilizes a 1 micron carbon filtration medium that removes chlorine, chloramines, hydrogen sulfide, pesticides, sediment, rust, VOCs, trihalomethanes, and more while reducing hard water scale. It is effective in a water hardness up to 25 GPG. Unlike salt-based systems, the minerals that make water “hard” are not removed. Instead, our proprietary scale reduction media prevents these minerals from forming scale and keeps them in a dissolved state. This scale reduction media will also prevent corrosion caused by iron, silica and chlorides and will also slowly remove existing. The AQFS234L is designed as a point of entry (POE) system and includes a 6 month cartridge.

The WP236 is a point of entry system (full house) designed for homes over 2000 square feet and on well water. This system will prevent and remove lime scale accumulation on pipes, fixtures and appliances, reduce corrosion caused by chlorides, silica and iron while removing sediment, sand, dirt and other particulate from the water. Our salt-free systems do not remove the healthy minerals from your water. Instead, we utilize a scale prevention media that inhibits hard water minerals from creating scale, and slowly removes existing scale over time. The WP236 utilizes our 5 micron, high flow, pleated polyester washable filter that includes our proprietary scale prevention media. The drop-in cartridge provides exceptional particulate removal and the pleated design provides high dirt load capacity with high flow rates. This wall mounted unit is designed to be installed at the water main entry point and will provide a flow rate of up to 15 GPM. The standard inlet and outlet connections are 1" NPT and the system has a design pressure of 125 PSI with a maximum operating temperature of 113° F. The included cartridge is designed for a maximum water hardness of 25 GPG and will last 6-9 months.

The SP220 is a point of use system for the reduction and prevention of sediment and lime scale accumulation on the inside of tankless water heaters and traditional water heaters. The heavy wall polypropylene housing utilizes our 5 micron 20” sediment filter which includes a proprietary scale prevention media designed to prevent and reduce harmful scale build up on heating elements and water heater tanks and prevent corrosion from chlorides, iron and silica. It will be effective in water hardness up to 15 GPG. This wall mounted unit is designed to be installed prior to a water heater and will provide a flow rate of up to 14 gallons per minute (GPM). The standard inlet and outlet connections are 3/4” NPT and has a design pressure of 125 PSI (6.6 bar) with a maximum operating temperature of 113°F (45°C). The melt blown, polypropylene cartridge has graded depth filtration to provide exceptional dirt loading capacity with high flow rates and minimal pressure loss. The proprietary scale prevention media is designed specifically for extreme water conditions found in high temperature filtration applications. The media is designed to last 6 months.