White Casement Window Locking Handle Primeline H 3716

Silver, 5.7" H x 3.75" W x 1.05" D

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a right-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For left-hand operators of the same style, see Prime-Line part H 4095.

White

Try this new and improved design that is easy to operate and add an extra layer of security to your home with this Prime-Line Door Reinforcement Lock with integral pull. Designed to withstand 800 pounds of force that provides an unparalleled level of protection! This reinforcement lock has a spring-loaded design, solid brass construction and a white finish with an additional integral finger pull for easy operation. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the door reinforcement lock comes with 3-inch hardened screws. Extra home security and peace of mind are well within reach and doesn’t have to come with the high price tag of an alarm system!

This reinforcement lock is very good quality. It was very easy to install, although I measured wrong the first time and had to move it. So, be careful and make sure you can close the door once it’s fully installed. It seems to be strong enough to withstand an intruder.. Melanie. US. Mon Mar 10 2025

This sliding patio door keyed locking unit by Prime-Line Products is constructed of diecast and comes in a corrosion-resistant, white-painted finish. This locking device is designed to convert non-locking Prime-Line patio door handle sets (model number: C 1174, C 1176 and C 1178) to keyed locking handles. This lock features a 5-pin tumbler with 2 keys. The lock body is solid brass construction with a hardened break-away tailpiece. Use to replace damaged key cylinders in most surface mount handles.

White

This is a right-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

This cam action window sash lock is constructed of stamped steel, and it comes in a white painted finish. It features a strong diecast lever, and its universal design allows it to fit with multiple manufacturer's windows. Lock is designed for use on vertical sliding windows constructed of wood, and can be used on both single and double hung sliding windows.

This is a sliding window lock that is keyed and securely locks window in closed or ventilating position. Securely locks window in closed or ventilating position.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

White

If your sliding glass door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This non-keyed Sliding Glass Door Handle Set makes the DIY project a breeze. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a clamp style with a surface mount and fits 4-15/16 inch hole spacing. The handle set fits on doors measuring 1 to 1-1/2 inch thick. If mounting on thicker doors, longer screws need to be purchased separately. The door handle set is constructed of diecast materials with a painted black finish, perfect for your black sliding door. Installation is quick and easy! Instructions and all fasteners necessary for the installation of this sliding door handle set are included in packaging. Due to the surface mounting, no mortising is required. The outside non-keyed pull is different in shape than the inside pull, and it can be changed to a locking outside pull using Prime-Line’s model numbers E 2000 or C 1120 (purchase separately). *Product Selection Tip: Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

It was perfect and super easy to install on my own. The old lock had broken so I just needed a replacement for my old sliding glass door.. Anonymous. Tue Sep 19 2023

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a white baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a left-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

Standard reversible surface mount for left or right-handed mortise-locking doors that have 3-15/16 on center mounting holes. The diecast inside pull has a wood handle, diecast thumb turn, and steel latch activator. The outside pull is diecast and keyed. A mortise lock is not included and is sold separately.

Very nice interior wood handle. Great quality.. Biserka. Burtonsville, MD. Fri May 24 2024

This patio door handle set comes with a black diecast inside handle with a hardwood pull. It is used by many patio door manufacturers. It can be used on either right or left-handed doors. The black diecast lever operates most mortise latches installed in the door (see E 2008, E 2009, E 2014 or E 2111). This is non-keyed but can be keyed by installing the Prime-Line E 2000 key cylinder into the outside handle. For thick doors order Prime-Line part E 2576 latch lever.

This patio door handle set comes with an inside handle with a hardwood pull and white diecast body. It is non-handed and can be used on right or left-handed doors. It is used by many patio door manufacturers.

Anonymous. Sat May 16 2026

This white finish patio door handle is a surface with a hook latch style. Often found on older style patio doors, it is mounted on the door's inside the frame and the hook latch engages the keeper mounted on the jamb. It has a 7/8 in. low handle height. It is a white extruded aluminum inside handle with an anti-lift feature on the hook latch. The hook latch has a 7/16 in. profile. Mounting holes are 4-15/16 in. on center. It can be keyed by installing Prime-Line part E 2071.

This sliding patio door handle set is constructed from durable diecast material with a white finish. It features a comfortable inside pull with a strong steel latch and an offset outside pull for easy operation. The set includes a keeper and a unique double hook lock for added security. Designed for non–keyed use, this handle set offers a simple yet reliable replacement option. Note: Mortise lock is sold separately.

The black added foam , does mark up the white handle requiring cleaning , otherwise works well , great buy. Dolores. Tecumseh, ON. Sat Mar 14 2026

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a left-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is non-handed lock that can be used on both left and right-handed casement windows, and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with a pair of keepers and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a right-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

Prime-Line part F 2936 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable 0.248 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in Pennsylvania and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

This is a right-handed Dyad casement operator with a white finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The mounting holes are a blind tap meaning that the screws thread through the window frame and into the back of the operator housing.

This sliding closet door bottom guide is constructed of plastic and comes white in color. Each bottom guide mounts with 2 fasteners and they are designed to accommodate 1-3/8 in. bypassing closet doors. This pack supplies 2 pairs of by-passing doors, or one 3-panel door system. The mounting holes of these floor guides are spaced apart at 4-3/16 in. from center to center, and they feature 1-1/8 in. tall supports. These bypassing sliding closet door bottom guides are easy to install and are used by a variety of closet door manufacturers.

Hi This is a good design for bi-fold doors with good spacing between doors. Ed. FL. Sat Jun 08 2024

This is a casement window locking handle with a design that enhances grip to the frame and improves the seal against dust and air infiltration. The diecast construction has a baked enamel white finish. It is a face mounted style with threaded holes for rear mounting.

White

Surface-mounted closer is fully rust and weather resistant making it suitable for exterior use. A single torsion spring is ideal for swinging screen doors and pool gates up to 57 lbs. (26kg) with an adjustable closing speed. Neat, compact, and durable white-painted housing is made of diecast zinc. Reversible handing. Do not overtighten, turning past 4 hole positions will cause this item to fail.

White, 13.15" H x 3.8" W x 1.45" D

This Prime-Line H 3507 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3508 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3709 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

White

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. This is a surface-mounted, cross-bolt locking device

13.15" H x 3.8" W x 1.45" D

This Prime-Line H 3711 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3833 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

Satin Nickel

This Fix-A-Latch, strike plate repair kit is constructed of stamped steel and white plastic components, and it comes in a beautiful finish. This kit can be used to easily repair a door that fails to latch when it is closed. The kit includes a strike plate for use with a 1-3/8 inch thick interior door, and another for a 1-3/4 thick exterior door. The white plastic bases come with adhesive-back tape strips and installation fasteners for a quick and simple repair. Note: These Fix-A-Latch repair plates require a 1/8 inch clearance gap between the doorjamb and the closed door’s edge.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This is a white finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on white finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

White

Add an additional privacy lock to your interior doors with this flip action door lock. The hinged portion of the reversible lock flips over the door to lock, and it can be used for right or left-handed swing-in doors. An anti-lock out screw is included for child safe mode, preventing the lock from engaging on its own, for additional child safety measures. This lock should be installed high on the door. Installation is quick and easy, and the flip action door lock fastens to the door jamb with two screws. It’s a surface mount installation with no mortising required. This door lock is strong and durable, sure to last the test of time.

This latch would work as a child lock I'm sure but I would not count on it to keep an intruder out at all. Besides that it's basically as they describe and it's worth the money but it just depends on what you actually intend on using it for.. Joe. Wisconsin. Fri Apr 11 2025

If your sliding patio door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This C 1225 sliding patio Door handle set makes the DIY project a breeze, and it includes an inside pull with an outside non-locking pull. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a mortise style and fits 3-15/16” hole spacing. The door handle set is constructed of white painted diecast materials, perfect for your white sliding patio door. Because there are multiple internal mortise locks that are compatible with this handle set, a mortise lock component is not included with this handle set. Although the C 1225 sliding patio Door handle set comes non-keyed, Prime-Line Products does manufacture other components that can convert this set to a keyed-locking handle set.

Very easy to install.. Rory. Burlington, ON. Thu Apr 06 2023

Prime-Line part F 2931 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches feature a round-end housing and install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable 0.345 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in New York, Pennsylvania and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

White

Prime-Line part F 2926 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable .373 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in North Carolina and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

This sliding door handle set is constructed from die-cast and comes finished in white. It features inside and outside pulls with a thumb lever and a reversible handle. This handle set is mortise style and uses E-2000 to the key lock.

Perfect size replacement. Mary. US. Wed Jun 21 2023

White Brass

Crafted with precision, the Legacy Handle Set boasts a sturdy diecast construction, ensuring durability and longevity. The diecast material not only adds strength to the handle but also exudes a touch of sophistication, making it a standout addition to your sliding glass door.

Very Happy with my new Chrome Slider Lock. Service was excellent & delivery was quick as well. Thanks. Elizabeth. Manchester, NH. Thu Jan 15 2026

This patio door handle set has matching inside and outside pulls. It features a white finish that is non-handed and used by a variety of manufacturers. This is a low profile non-keyed handle set.

White, 5.44" H x 3.82" W x 0.88" D

This is a is a diecast T-handle that universally fits Andersen casement operators. The 3/8 inch bore fits most operators with a 3/8 inch spindle and held firmly in place with the supplied set screw. This T-handle is champagne in color, and the design is often used to replace the normal crank handle when it interferes with window blinds.

White

Works well on the bathroom's pocket door.. Anonymous. Tue Apr 14 2026

The Larson Heavy-Duty Push-Button Handle is designed for solid core storm doors, delivering durability, convenience, and security in one sleek package. The push-button operation allows for effortless entry and exit, while the secure latch and keyed lock add extra protection. With a surface-mount design for quick installation and a weather-resistant finish for long-lasting performance, this handle is built to withstand the elements.

Mirna. US. Sun Aug 10 2025

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025