Vestil Pkgptc

This tensioner is a great poly strapping tool designed to apply tension to the strapping with minimal effort. This tool is also equipped with a cutter to cut the excess poly strapping.

An eight-wheel dolly can be a major benefit in many conditions. The large oversized wheels give the unit and any material on board, a smooth vessel to move goods in-between areas. Yellow adjustable plate fitted to the rear of the unit. The plate acts as a barrier for items that fit snuggly on the dolly. When the plate is down, it makes room for any oversized products that are too long to fit perfectly square onto the platforms of the dolly. The front of the dolly is an open design that makes it easy to secure any sort of pulling device that may be used. Also included is a strap that can be used to pull the unit, by mechanical or manual means. The eight-wheel unit provides added capacity to the unit by including two extra wheels to the center of the dolly for a more solid foundation.

Store steel drums in the vertical position with this non-flammable heavy-duty, one-hundred (100) percent Recycled, Vertical Steel Retention Basin. The basin is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Four way fork entry. Basins are stackable when empty to provide more space in a warehouse or storage area.

15" H x 38" W x 84.88" D

Unique performance, convenience, and safety features are built into every lift master boom. Fabricated from structural steel with welding to meet AWS creates a rugged and durable boom that will provide long term service. This unit comes with an infinitely adjustable locking screw. A safety restraint secures the boom to the fork truck for safe operation.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inches long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall mount brackets, cylinder, One-hundred Eighty (180) inch hydraulic line and oil. Truck must pull out for leveler to return to stored position.

62.5" H x 25.5" W x 57.25" D

This solid steel Pallet Lifter contains tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load.

This Portable Drum Lifter/Rotator/Transporter is air powered. For use with steel and fiber drums.

The Pneumatic Tire Hydraulic Elevating Carts are designed to be ergonomically friendly for use in landscaping and construction sites. The unit is constructed of powder coated welded steel for long lasting durability, while moving smoothly on pneumatic tires over the roughest of conditions. The cart can be elevated or lowered with the foot actuated pump and can be held in place while in use with the additional safety stops.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

The Manual Operation, Portable Drum Lifter/Rotator/Transporter features pivoting straddle legs for access to drums on pallets. Legs will manually pivot and lock into place with locking pin. The unit is good to use with steel and fiber drums.

This portable drum lifter/rotator/transporter features a rotation mechanism that provides rotation of the drum. The mechanism raises and lowers the drum. For use with steel and fiber drums.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

The Portable Worksite Lift is ideal for positioning loads where they are needed. It includes a lifting platform and an overhead lifting boom for unique applications. It features a manual hand crank cable winch with hook. Portability is easy with the phenolic swivel casters and a push handle. The unit knocks down in three pieces- base, platform and upright. It's ideal for storage in tight places and for transportation in the back of a vehicle.

DC powered portable hydraulic lifts are user friendly providing reliable, powerful lifting when moving and positioning loads. Units roll easily on two rigid and two swivel poly-on-steel casters and include a foot operated brake. Not for use with pallets. All welded steel construction with chrome uprights. Variety of attachments available.

Transport plants, flowers, trees, shrubs, rocks, and similar materials or parts with this landscape, nursery & agriculture cart. The cart is rugged and easy to maneuver with their large pneumatic tires. This platform cart has mesh sides and bottoms to allow dirt, small rocks, and water to drain through.

love it! Ive carried bags of mulch and potting mix as well as large, heavy pots around the yard! What a back saver!!!. Caroline. TX. Thu Jul 28 2022

The Lite Load Lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This Lift is easy to operate with a hand winch operation and a steel construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters and a hand operated floor lock. Located on the handle are two (2) rollers to ease loading into delivery trucks. 400 lb. capacity.

This Overhead Drum Lifter is designed for lifting drums with an overhead crane or similar lifting device. Integral fork pockets are also included for transportation with forklift. Safety restraint included. Steel saddle is designed for use with steel, plastic & fiber drums with a ratchet strap for securely holding the drum in place. With a non-tilting style, this lifter is made for straight vertical lifting only. Features a durable yellow baked-in powder-coated toughness.

The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with a push-button hand control on a coil cord.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

A cylinder truck transports cylinders safely. This unit comes complete with safety chains to secure the cylinders in place. Made of all-steel construction. The casters allow for portability without the need of a fork truck or pallet truck.

Multi-Purpose Overhead Drum Lifter/Wrench with it's simple three-arm design for use with closed head steel, plastic, and fiber drums with a top lip. Each removable arm also functions as a wrench for use on drum plugs, faucets, and rim ring bolts. Mechanical operation. Requires assistance from an overhead lifting device.

The Economy Portable Drum Lifter/Rotator/Transporter make it easy to lift, transport and tilt drums. Ideal for use in warehouse environments when moving drums to and from racks. Drums can be locked in a vertical position to avoid spills or a horizontal position for draining through a faucet. A manual hand crank allows the drum to tilt. Raise the drums with a manual hand or foot pump operation. This model has a clamp style cradle which securely grips around the drum. For use with steel drums only.

The All Terrain Pallet Truck is lightweight yet the strong tubular frame design handles evenly distributed loads. The large wheels allow for movement over most surfaces. Unit is great for use at construction sites, gravel pits, and nurseries. It's easy to operate with three position handle, UP, DOWN, and NEUTRAL. Unit rolls on pneumatic front tires and pneumatic steering wheels.

This traction-drive cart features built-in traction-drive system for easy transportability. Ideal for applications including mail rooms, hospitals, supermarkets, hotels and warehouses. Features electric drive motor with batteries for power. Internal battery charger is included. Variable throttle speed control for precise maneuvering and positioning is located in the handle. Cart rolls smoothly on non-marking solid foam filled wheels. Speed control is conveniently located in handle. Handle pivots back towards operator and includes horn, automatic brake and emergency stop. Each shelf includes a non-slip tread plate surface. Includes on-board charger and battery level indicator.

This near vertical Drum Lifter is designed for the transportation of closed head steel drums with an overhead lifting device. The adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position. Easily attaches to any drum with both a top and bottom lip. Adjustable top attachment point for use with different height drums.

The Portable Hydraulic Drum Carrier/Rotator/Boom allows one person to lift, transport, and dispense fully loaded steel drums with ease. It features a manual foot pump hydraulic lift and rolls on casters and wheels. This unit has a chain rotation to rotate the drum. This unit features a lifting boom attachment which stores on the outriggers.

The die table is designed to reduce back injuries and cumulative trauma disorders. It lifts heavy equipment to ergonomic working heights. The unit has a manually operated hydraulic foot pump and lift cylinder. The all welded steel construction will provide years of service and hard work. The small frame size allows unit to access hard to reach locations. Unit rolls smoothly on two rigid and two swivel with side brakes casters standard.

The Pallet Rack Drum Cradle converts pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out).

Made of high-strength annealed ductile iron, this steel machine roller has swivel tops that rotate 360° on chrome steel ball bearings to allow for easier turning. The rollers form a "tank track" to revolve around a center load bearing plate in the frame to provide maximum maneuverability. The weight of the load is transferred directly from the load bearing plate to the rollers, eliminating axle friction and requiring less power to start and move. This unit is virtually maintenance free.

Pallet rack lifting dollies are designed for moving empty fully-assembled pallet racking. These dollies are used with the pallet lifting dolly jack to hold racking frame feet.

Silver

The Welding Cylinder Torch Cart is designed for transporting cylinders and cutting torch. Includes two (2) tank compartments with heavy-duty ratchet straps. Brackets are included for holding cutting torch and hose. Sturdy handles and large wheels for tilt-n-go portability. This unit includes lockable storage box for regulators. Box includes hose opening so regulator does not need to be disconnected for storage. Overhead lift eye. Fork pockets for transportation. Galvanized welded steel construction with painted finish. Not designed for use as a storage means for gas cylinders.

V-Groove pipe mover makes pipe and tubing measuring for easily moved by 1 person. The V-Groove design keeps loads at the horizontal center of gravity for maximum stability and safety. Large tires will support heavy loads. Includes a handle for added maneuverability.

Fully Electric Pallet Jack: Up to 4400 lbs Load Capacity: Our electric pallet jack supports up to 4400 lbs with a high-strength steel frame and 2.1-inch thick forks. It easily handles 6° inclines, with a compact 52.76-inch turning radius. A full charge takes 4-5 hours, providing 6 hours of continuous use. Includes security features for efficient, secure handling. Ideal for warehouses and loading platforms!

201" H x 88" W x 120" D

The adjustable height steel gantry crane is designed for transporting and positioning materials along the length of the beam. The crane's beam height can be adjusted to better conform to the working conditions making it both ergonomically friendly and cost-effective. Unit comes with standard four-position locking swivel casters with roller bearings. Locks the rigging in 1 of 4 positions; you can set the wheels and push the gantry crane forward, back, left or right. Do not move units while loaded. The hoist and trolley can be ordered separately. A painted blue finish protects the unit. Designed for semi-permanent or permanent applications.

The unique portable Roll Dolly is designed for moving, holding, and dispensing rolls of material right where they are needed. Integral turntable easily rotates on ball bearings to allow for dispensing. Upright post detaches to allow for easy loading of larger rolls. Portable on lockable swivel casters steel construction and powder coat finish.

The Drum Positioner allows fork truck driver to rotate standing drums to the horizontal racking position and vice-versa. Positive latching system ensures safe handling of drums. Slide the positioner extensions over the vertical drum. With the aid of the Drum Positioner, rotate drum to horizontal position. Latching system will engage to allow horizontal positioning of drum. It’s now ready to slide into the rack. Mechanical operation relies on fork truck to rotate and lift drums. The Drum Positioner features a welded spacer to protect drum fixtures from damage when rotating.

72.25" H x 68.88" W x 50" D

Unique portable Economical Drum Transporter is designed to lift and transport drums with a top lip. Steel jaw securely grips the top lip of the drum. DC Powered lift mechanism. Straddle legs rotate for access to drums on pallets. All welded steel construction Powder coated with a safety yellow finish.

The Adjustable Box Stacker is specially designed for transporting, stacking, and lifting plastic crates and similar type containers. It is compact and lightweight. Both fork width and box clamps are adjustable to fit different size boxes and containers. All box clamps are rubber coated for extra grip.

The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This low profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels and semi-steel front wheels. Located on the handle are two rollers to ease loading into delivery trucks.

The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The phenolic casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.

The Pallet Master/Server enables one person to easily move fully loaded pallets without the use of a fork truck. The unique straddle design works well with pallets and skids with and without an understructure. The unit is ideal for loading and unloading semi-trailers. Hand pendant control on an eight (8) foot coil cord standard. Floor lock standard. All welded steel construction.

The Die Table is designed to reduce back injuries and cumulative trauma disorders. It lifts heavy equipment to ergonomic working heights. The unit has a manually operated hydraulic foot pump and lift cylinder. The all welded steel construction will provide years of service and hard work. The small frame size allows unit to access hard to reach locations. Unit rolls smoothly on two rigid and two swivel with side brake casters standard.

This loading platform for fork trucks allows fork trucks to load/unload items into trucks and trailers. Maximum uniform weight capacity is dependent on fork truck capacity. Includes fold-down lip to help with the transition. Side guard toeboards. Four (4) tie-down rings are included for securing equipment (tie downs not included). Checker plate floor for extra traction. Handrails on two (2) sides, back mesh screen, and chain to secure the open end. Safety strap (included) to secure platform to fork truck. Steel construction with blue baked-in powder-coated toughness.

This time tested and proven Automatic Eagle Beak Drum Lifter design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open (lid installed and secured) and closed head steel, plastic and fiber drums with a top lip strong enough to support the weight of the drum. This unit is a single-drum configuration. Includes safety restraint to secure unit to the fork truck. A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.