Vestil Phch1020

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

An eight-wheel dolly can be a major benefit in many conditions. The large oversized wheels give the unit and any material on board, a smooth vessel to move goods in-between areas. Yellow adjustable plate fitted to the rear of the unit. The plate acts as a barrier for items that fit snuggly on the dolly. When the plate is down, it makes room for any oversized products that are too long to fit perfectly square onto the platforms of the dolly. The front of the dolly is an open design that makes it easy to secure any sort of pulling device that may be used. Also included is a strap that can be used to pull the unit, by mechanical or manual means. The eight-wheel unit provides added capacity to the unit by including two extra wheels to the center of the dolly for a more solid foundation.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inches long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall mount brackets, cylinder, One-hundred Eighty (180) inch hydraulic line and oil. Truck must pull out for leveler to return to stored position.

34.25" H x 17.75" W x 34.56" D

The hydraulic elevating cart minimizes worker bending and lifting through its ergonomic design and portability. The material can be easily loaded onto a cart from a table, lowered to a safe transporting height, and raised to unload at destination. The foot pump includes a soft-lowering down valve. Features a single-speed foot pump.

This portable drum lifter/rotator/transporter features a rotation mechanism that provides rotation of the drum. The mechanism raises and lowers the drum. For use with steel and fiber drums.

This Portable Drum Lifter/Rotator/Transporter is air powered. For use with steel and fiber drums.

62.5" H x 25.5" W x 46.4375" D

This solid steel Pallet Lifter contains tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load.

The Manual Operation, Portable Drum Lifter/Rotator/Transporter features pivoting straddle legs for access to drums on pallets. Legs will manually pivot and lock into place with locking pin. The unit is good to use with steel and fiber drums.

The Pneumatic Tire Hydraulic Elevating Carts are designed to be ergonomically friendly for use in landscaping and construction sites. The unit is constructed of powder coated welded steel for long lasting durability, while moving smoothly on pneumatic tires over the roughest of conditions. The cart can be elevated or lowered with the foot actuated pump and can be held in place while in use with the additional safety stops.

The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with a push-button hand control on a coil cord.

The Portable Worksite Lift is ideal for positioning loads where they are needed. It includes a lifting platform and an overhead lifting boom for unique applications. It features a manual hand crank cable winch with hook. Portability is easy with the phenolic swivel casters and a push handle. The unit knocks down in three pieces- base, platform and upright. It's ideal for storage in tight places and for transportation in the back of a vehicle.

205" H x 88" W x 240" D

The adjustable height steel gantry crane is designed for transporting and positioning materials along the length of the beam. The crane's beam height can be adjusted to better conform to the working conditions making it both ergonomically friendly and cost-effective. Unit comes with standard four-position locking swivel casters with roller bearings. Locks the rigging in 1 of 4 positions; you can set the wheels and push the gantry crane forward, back, left or right. Do not move units while loaded. The hoist and trolley can be ordered separately. A painted blue finish protects the unit. Designed for semi-permanent or permanent applications.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

DC powered portable hydraulic lifts are user friendly providing reliable, powerful lifting when moving and positioning loads. Units roll easily on two rigid and two swivel poly-on-steel casters and include a foot operated brake. Not for use with pallets. All welded steel construction with chrome uprights. Variety of attachments available.

The steel fork lifter is designed to quickly and easily attach or remove forged steel forks from a carriage. The lifter features different hook points to balance a variety of fork lengths. Two tightening knobs are included to secure the fork to the lifter when being moved.

A power lift jib crane is designed for material handling applications on docks, in warehouses, or in truck beds. This lift jib crane is the economical answer to your material handling problems. It offers light-duty, intermittent use. Locking manual rotation. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

9.88" H x 18" W x 72" D

Elevate semi-trailers to loading docks for maximum serviceability during loading and unloading operations. Manufactured from heavy-duty aluminum tread plate for positive traction. All welded aluminum construction. 30,000 lbs. uniform capacity per pair (¼" thick material). Wheel Risers are designed to raise the trailer for loading and unloading to facilitate compliance with OSHA/ANSI B56.1 part 3 sec 7requirements for maximum grade of ascending or descending loaded fork trucks.

The Lite Load Lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This Lift is easy to operate with a hand winch operation and a steel construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters and a hand operated floor lock. Located on the handle are two (2) rollers to ease loading into delivery trucks. 400 lb. capacity.

The Economy Portable Drum Lifter/Rotator/Transporter make it easy to lift, transport and tilt drums. Ideal for use in warehouse environments when moving drums to and from racks. Drums can be locked in a vertical position to avoid spills or a horizontal position for draining through a faucet. A manual hand crank allows the drum to tilt. Raise the drums with a manual hand or foot pump operation. This model has a clamp style cradle which securely grips around the drum. For use with steel drums only.

This time tested and proven Automatic Eagle Beak Drum Lifter design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open (lid installed and secured) and closed head steel, plastic and fiber drums with a top lip strong enough to support the weight of the drum. This unit is a single-drum configuration. Includes safety restraint to secure unit to the fork truck. A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.

10'

Constructed from high-strength lightweight aluminum alloy, it offers weather resistance, lightweight durability, and robust performance. The aluminum material delivers superior strength and corrosion resistance, capable of withstanding heavy loads for long-lasting reliability. Enhance your daily convenience—whether at hospitals, schools, or your own doorstep—it seamlessly adapts to open new horizons for wheelchair users!

Exactly what I needed. The quality, price and delivery are AWESOME!. Donna. Tennessee. Tue May 26 2026

The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use inventory storage systems. This low-profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters, and a hand-operated floor lock. Located on the handle are two rollers to ease loading into delivery trucks.

The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This low profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels and semi-steel front wheels. Located on the handle are two rollers to ease loading into delivery trucks.

The unique portable Roll Dolly is designed for moving, holding, and dispensing rolls of material right where they are needed. Integral turntable easily rotates on ball bearings to allow for dispensing. Upright post detaches to allow for easy loading of larger rolls. Portable on lockable swivel casters steel construction and powder coat finish.

The optional mobile wheel kit system includes casters and a detachable handle

This near vertical Drum Lifter is designed for the transportation of closed head steel drums with an overhead lifting device. The adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position. Easily attaches to any drum with both a top and bottom lip. Adjustable top attachment point for use with different height drums.

This drum lifter may be used to lift steel drums with either an overhead chain or fork truck. The lifter is designed to lift the drum from the top lip, includes a locking mechanism to prevent the unit from falling off the drum.

Designed to lift up to 10,000 lbs, this 2 post hydraulic car lift delivers reliable strength for sedans, SUVs, and pickups. Its 220V system ensures smooth, efficient operation, while the 2+3 adjustable arm design provides enhanced stability for long-wheelbase and larger vehicles. Built from 6mm thick Q235B steel, the reinforced structure resists bending and wear over time. Rubber door protectors prevent scratches, and included height extenders with U-shaped pads ensure safe, level lifting for high-chassis or modified vehicles—perfect for garages and workshops.

Store steel drums in the vertical position with this non-flammable heavy-duty, one-hundred (100) percent Recycled, Vertical Steel Retention Basin. The basin is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Four way fork entry. Basins are stackable when empty to provide more space in a warehouse or storage area.

This Overhead Drum Lifter is designed for lifting drums with an overhead crane or similar lifting device. Integral fork pockets are also included for transportation with forklift. Safety restraint included. Steel saddle is designed for use with steel, plastic & fiber drums with a ratchet strap for securely holding the drum in place. With a non-tilting style, this lifter is made for straight vertical lifting only. Features a durable yellow baked-in powder-coated toughness.

This time tested and proven Automatic Eagle Beak Drum Lifter design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open (lid installed and secured) and closed head steel, plastic and fiber drums with a top lip strong enough to support the weight of the drum. This unit is a double-drum configuration. Includes safety restraint to secure unit to the fork truck. Welded steel construction. Powder coat finish. A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.

72.25" H x 68.88" W x 50" D

Unique portable Economical Drum Transporter is designed to lift and transport drums with a top lip. Steel jaw securely grips the top lip of the drum. DC Powered lift mechanism. Straddle legs rotate for access to drums on pallets. All welded steel construction Powder coated with a safety yellow finish.

Multi-Purpose Overhead Drum Lifter/Wrench with it's simple three-arm design for use with closed head steel, plastic, and fiber drums with a top lip. Each removable arm also functions as a wrench for use on drum plugs, faucets, and rim ring bolts. Mechanical operation. Requires assistance from an overhead lifting device.

Experience unmatched comfort and support with this electric wheelchair featuring 8-10 inch run-flat tires for safe travel on any surface. Its ergonomic seat and breathable cushion ensure all-day comfort. Easy to use with a 360-degree control lever and five-speed settings, it meets various mobility needs. With a lightweight, foldable design and a powerful 500W motor, this wheelchair offers a range of up to 15 miles, combining reliability with convenience for active lifestyles. Enhanced safety features like an electronic braking system and anti-tilt wheels provide peace of mind on every journey.

Claude. Quebec, QC. Mon May 04 2026

The Lite Load Lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. The unit is easy to operate with a foot pump and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels and semi-steel front wheels. Located on the handle are two rollers to ease loading into delivery trucks.

A stainless steel, adjustable, 3-point drum lifter for lifting, transporting, and stowing 30 and 55 gallon steel or plastic drums. Designed with a 3-point drum contact with stabilizing arms, which reduces damage to the drum and automatically engages the drum rim when lowered. Ideal vertical drum lifting tool which can be used with an overhead crane, hoist, or forklift attachment. Strong and durable - 304 grade full stainless steel construction. Designed for quick and easy one person operation.

The Portable Lift-and-Dump Hydraulic Drum Dumper is what you need to dump drums at variable heights. The HLD works similarly to the HDD but includes a lift cylinder that allows you to dump at various heights. Feature a four (4) push button pendant which allows the operator full independent control of both lift height and the dump angle.

The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The phenolic casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

The Hydra Cart transports loads in the lowered position and maneuver work materials to an ergonomic height, which is ideal in compact work areas. It's safe and easy for one person handling of loads and an efficient way to unload heavy objects from semi-trailers. The rugged steel construction allows for many years of service. The dependable precision built hydraulic system is activated by an easy action foot lever. The additional rollers on the handle make loading into a delivery truck easy. A single wheel brake comes standard.

Transform a corner of your home into a complete commercial-grade strength studio with the Sportsroyals All-in-One Power Cage. This isn't just a squat rack—it's an integrated training hub that combines a heavy-duty 4000LBS capacity cage with a professional dual-pulley cable crossover system, eliminating the need for multiple machines. Crafted from massive 40x80mm commercial steel, it delivers unwavering stability for the heaviest squats, while the near 1:2 ratio cable system ensures smooth, effective resistance for lat pulldowns, rows, curls, and extensions. Best of all, it arrives ready to train with over 15 premium accessories included, from J-hooks and safety bars to dip bars and a landmine attachment. Whether you're pressing, pulling, or dipping, this cage provides a safe, specific, and high-capacity platform for every exercise. Designed for shared home use with a spacious footprint and straightforward assembly, it's the ultimate single-machine solution to build limitless strength.

This is probably the most impressive piece of gym equipment I’ve ever used. It has every workout any person could ever want and it’s fully modular. Sit ups, pull ups, bench press, rowing, band workouts, squat rack… and more I probably haven’t even figured out yet. It is extremely sturdy and can easily hold my entire weight without wobbling at all. The best part is that it doesn’t even take up that much space… could easily fit in a small workout room or garage gym. Super impressed with the quality. It also shipped quickly and comprehensively in three boxes. It took a while to build, but if you have a socket wrench or a power tool you could do it in a few hours. Couldn’t be happier 1010. Jason. Ann Arbor, MI. Sat May 16 2026

1.25" H x 20.25" W x 10.5" D

This manual cylinder lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The lifter has a rubber-coated center and handles holes. Steel construction with a powder-coat yellow finish.

9" H x 39" W x 84" D

The steel wheel riser is equipped with fork slots for ease in fork truck transporting. Ramps may be stacked for compact storage when not in use. This wheel riser is designed to raise the trailer for loading and unloading to facilitate compliance with OSHA/ANSI, requirements for a maximum grade of ascending or descending loaded fork trucks. Made of heavy-duty welded steel construction. Wheel riser is priced and sold each. The steel wheel riser is equipped with fork slots for ease in fork truck transporting. Ramps may be stacked for compact storage when not in use. This wheel riser is designed to raise the trailer for loading and unloading to facilitate compliance with osha/ansi, requirements for maximum grade of ascending or descending loaded fork trucks. Made of heavy-duty welded steel construction. Wheel riser is priced and sold each.

The Three-Arm Secure Grip Overhead Drum Lifter is designed exclusively for lifting closed-head and open-head 55 gallon steel drums with a secured lid installed (not for use on open-head steel drums without a lid). Unit is designed for quick and easy one person operation. This product works on select 55 gallon plastic & fiber drums with a top lip strong enough to hold the weight of the drum. Designed for quick and easy one person operation with drum in a vertical position. The narrow profile design is great for picking up drums packed close together. The three-arm ductile-iron design offers maximum strength and simplicity allowing the centering of the drum under the lifter. The polyurethane "spring" loop keeps the lifter securely engaged to the drum which is especially beneficial when using the lifter in a rough environment. Unit must be manually disengaged from drum when finished with use. Patented design with a large lifting ring for use with most overhead lifting mechanisms. This Drum Grabber was designed in Australia winning several awards.

These lightweight lifts are designed to take the strain out of any lifting job. Ideal for use in narrow aisles and confined spaces. Platform height is adjustable with a manual hand winch. An auto brake system allows for controlled lowering.