Vestil Alum3conv

Maximize control for different types of loads. These hands trucks can transport boxes wherever they are needed. Transport loads smoothly and evenly over rough or uneven floors. Pneumatic tires are standard on all hands trucks, while industrial solid rubber tires are also available. The convertible hand trucks have pneumatic tires and poly on swivel casters. Optional stair guides available. Assembly is required.

Store steel drums in the vertical position with this non-flammable heavy-duty, one-hundred (100) percent Recycled, Vertical Steel Retention Basin. The basin is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Four way fork entry. Basins are stackable when empty to provide more space in a warehouse or storage area.

An eight-wheel dolly can be a major benefit in many conditions. The large oversized wheels give the unit and any material on board, a smooth vessel to move goods in-between areas. Yellow adjustable plate fitted to the rear of the unit. The plate acts as a barrier for items that fit snuggly on the dolly. When the plate is down, it makes room for any oversized products that are too long to fit perfectly square onto the platforms of the dolly. The front of the dolly is an open design that makes it easy to secure any sort of pulling device that may be used. Also included is a strap that can be used to pull the unit, by mechanical or manual means. The eight-wheel unit provides added capacity to the unit by including two extra wheels to the center of the dolly for a more solid foundation.

The Pneumatic Tire Hydraulic Elevating Carts are designed to be ergonomically friendly for use in landscaping and construction sites. The unit is constructed of powder coated welded steel for long lasting durability, while moving smoothly on pneumatic tires over the roughest of conditions. The cart can be elevated or lowered with the foot actuated pump and can be held in place while in use with the additional safety stops.

34.25" H x 17.75" W x 34.56" D

The hydraulic elevating cart minimizes worker bending and lifting through its ergonomic design and portability. The material can be easily loaded onto a cart from a table, lowered to a safe transporting height, and raised to unload at destination. The foot pump includes a soft-lowering down valve. Features a single-speed foot pump.

The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with a push-button hand control on a coil cord.

The portable aluminum load lifter is durable, lightweight, and constructed of corrosion-resistant aluminum. Ideal in shipping and receiving areas to load and unload pallet racking and to move parts. This unit folds up and down for compact storage and easy transportation. The ultra low profile design with the ramp is great for the appliance, office, and furniture stores. Features a foot-actuated brake.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inches long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall mount brackets, cylinder, One-hundred Eighty (180) inch hydraulic line and oil. Truck must pull out for leveler to return to stored position.

The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use inventory storage systems. This low-profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters, and a hand-operated floor lock. Located on the handle are two rollers to ease loading into delivery trucks.

V-Groove pipe mover makes pipe and tubing measuring for easily moved by 1 person. The V-Groove design keeps loads at the horizontal center of gravity for maximum stability and safety. Large tires will support heavy loads. Includes a handle for added maneuverability.

The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The phenolic casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.

62.5" H x 25.5" W x 46.4375" D

This solid steel Pallet Lifter contains tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load.

205" H x 88" W x 240" D

The adjustable height steel gantry crane is designed for transporting and positioning materials along the length of the beam. The crane's beam height can be adjusted to better conform to the working conditions making it both ergonomically friendly and cost-effective. Unit comes with standard four-position locking swivel casters with roller bearings. Locks the rigging in 1 of 4 positions; you can set the wheels and push the gantry crane forward, back, left or right. Do not move units while loaded. The hoist and trolley can be ordered separately. A painted blue finish protects the unit. Designed for semi-permanent or permanent applications.

This portable drum lifter/rotator/transporter features a rotation mechanism that provides rotation of the drum. The mechanism raises and lowers the drum. For use with steel and fiber drums.

The Portable Worksite Lift is ideal for positioning loads where they are needed. It includes a lifting platform and an overhead lifting boom for unique applications. It features a manual hand crank cable winch with hook. Portability is easy with the phenolic swivel casters and a push handle. The unit knocks down in three pieces- base, platform and upright. It's ideal for storage in tight places and for transportation in the back of a vehicle.

This time tested and proven Automatic Eagle Beak Drum Lifter design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open (lid installed and secured) and closed head steel, plastic and fiber drums with a top lip strong enough to support the weight of the drum. This unit is a single-drum configuration. Includes safety restraint to secure unit to the fork truck. A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.

The unique portable Roll Dolly is designed for moving, holding, and dispensing rolls of material right where they are needed. Integral turntable easily rotates on ball bearings to allow for dispensing. Upright post detaches to allow for easy loading of larger rolls. Portable on lockable swivel casters steel construction and powder coat finish.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

This Portable Drum Lifter/Rotator/Transporter is air powered. For use with steel and fiber drums.

The Manual Operation, Portable Drum Lifter/Rotator/Transporter features pivoting straddle legs for access to drums on pallets. Legs will manually pivot and lock into place with locking pin. The unit is good to use with steel and fiber drums.

The DC Powered Hydraulic Elevating Cart is ideal for quick lifting and ergonomic material handling. The battery-powered unit allows operators to raise and lower platform with the hand held push button. The unit rolls on two rigid and two swivel polyurethane casters. It includes battery, on-board battery charger and battery charge indicator gauge. Features an internal safety velocity fuse in each cylinder.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

Hydraulic Post Tables are ideal in material handling facilities. The unit can be of use in a variety of environments from lifting dies and castings to moving machine parts. The corner posts are telescoping to help stabilize and fully support the load during operation. The tables roll smoothly on two (2) locking swivel casters with brakes and two (2) rigid. The tables can be lifted/lowered with a single speed foot pump, two-speed foot pump, two speed auto shifter that automatically shifts when the table is loaded, or linear actuated power.

The hydraulic elevating cart minimizes worker bending and lifting through its ergonomic design and portability. The material can be easily loaded onto a cart from a table, lowered to a safe transporting height, and raised to unload at destination. The foot pump includes a soft-lowering down valve. The unit moves easily on four polyurethane casters, two swivels with brakes and two rigid. Features a single-speed foot pump and aluminum construction. Features an internal safety velocity fuse in each cylinder.

6.125" H x 24" W x 30" D

72.25" H x 68.88" W x 50" D

Unique portable Economical Drum Transporter is designed to lift and transport drums with a top lip. Steel jaw securely grips the top lip of the drum. DC Powered lift mechanism. Straddle legs rotate for access to drums on pallets. All welded steel construction Powder coated with a safety yellow finish.

Transport plants, flowers, trees, shrubs, rocks, and similar materials or parts with this landscape, nursery & agriculture cart. The cart is rugged and easy to maneuver with their large pneumatic tires. This platform cart has mesh sides and bottoms to allow dirt, small rocks, and water to drain through.

love it! Ive carried bags of mulch and potting mix as well as large, heavy pots around the yard! What a back saver!!!. Caroline. TX. Thu Jul 28 2022

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This low profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels and semi-steel front wheels. Located on the handle are two rollers to ease loading into delivery trucks.

This traction-drive cart features built-in traction-drive system for easy transportability. Ideal for applications including mail rooms, hospitals, supermarkets, hotels and warehouses. Features electric drive motor with batteries for power. Internal battery charger is included. Variable throttle speed control for precise maneuvering and positioning is located in the handle. Cart rolls smoothly on non-marking solid foam filled wheels. Speed control is conveniently located in handle. Handle pivots back towards operator and includes horn, automatic brake and emergency stop. Each shelf includes a non-slip tread plate surface. Includes on-board charger and battery level indicator.

This Overhead Drum Lifter is designed for lifting drums with an overhead crane or similar lifting device. Integral fork pockets are also included for transportation with forklift. Safety restraint included. Steel saddle is designed for use with steel, plastic & fiber drums with a ratchet strap for securely holding the drum in place. With a non-tilting style, this lifter is made for straight vertical lifting only. Features a durable yellow baked-in powder-coated toughness.

Transport plants, flowers, trees, shrubs, rocks, and similar materials or parts with this landscape, nursery & Agriculture cart. The cart is rugged and easy to maneuver with their large pneumatic tires. This cart has mesh sides and bottoms to allow dirt, small rocks, and water to drain through. Tow coupler is standard.

Use this all the time to move stuff around the yard. Jeffrey. San Bruno, CA. Mon Jan 25 2021

Silver

The Welding Cylinder Torch Cart is designed for transporting cylinders and cutting torch. Includes two (2) tank compartments with heavy-duty ratchet straps. Brackets are included for holding cutting torch and hose. Sturdy handles and large wheels for tilt-n-go portability. This unit includes lockable storage box for regulators. Box includes hose opening so regulator does not need to be disconnected for storage. Overhead lift eye. Fork pockets for transportation. Galvanized welded steel construction with painted finish. Not designed for use as a storage means for gas cylinders.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

The Lite Load Lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This Lift is easy to operate with a hand winch operation and a steel construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters and a hand operated floor lock. Located on the handle are two (2) rollers to ease loading into delivery trucks. 400 lb. capacity.

This convenient fork truck work platform quickly and safely raises maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Fork locks secure platform to forks. Dual handrails on three (3) sides. Expanded metal backing on the fourth side. Includes checker floor plate platform and long strap with hook to attach platform to fork truck. A maximum of two (2) people can be on the work platform at one time. This unit also includes casters.

This near vertical Drum Lifter is designed for the transportation of closed head steel drums with an overhead lifting device. The adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position. Easily attaches to any drum with both a top and bottom lip. Adjustable top attachment point for use with different height drums.

These lightweight lifts are designed to take the strain out of any lifting job. Ideal for use in narrow aisles and confined spaces. Platform height is adjustable with a manual hand winch. An auto brake system allows for controlled lowering.

Quickly remove the head of a steel drum with this Express Open Manual Drum Deheader! Unique design is similar to a household can-opener and is very easy to use. Includes vice-grip style mechanism for securely attaching unit to drum. Inside cutting blade does not leave a sharp edge on the drum. Use only either a ½ inch manual ratchet wrench or electric drill to operate the de-header ratchet. DO NOT use a pneumatic or electric impact wrench to operate the deheader ratchet. WARNING: Improper use of this drum deheader might result in personal injury or damage the deheader. Ratchet not included.

3.5" H x 48" W x 48" D

A scale ramp is an ideal option for the electric digital floor scale. The unit features steel construction with a tread plate that provides a strong foundation for consistent use. This unit is portable and can be moved from workstation to workstation.

This time tested and proven Automatic Eagle Beak Drum Lifter design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open (lid installed and secured) and closed head steel, plastic and fiber drums with a top lip strong enough to support the weight of the drum. This unit is a double-drum configuration. Includes safety restraint to secure unit to the fork truck. Welded steel construction. Powder coat finish. A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.

The manual stacker is designed to meet the most challenging tasks. Ideal for use in various workstation and workplace applications. Maintenance-free and easy to use. The full height push handle allows for easy steering and excellent visibility through a welded mesh guard with an optional removable platform available. The Hand Winch Stacker features a heavy-duty mast and a unique winch design for easier and safer lifting. The lift and lower is done by hand winch and a steel cable mechanism. The two (2) rigid and two (2) swivel wheels with brakes make it easy for maneuvering. The unit features both adjustable forks and adjustable legs.

The heavy-duty plastic platform truck will not rust, discolor, or warp. Maintenance free and easy to clean. Honeycomb construction is reinforced for longer life. Extra square steel tube underneath platform to reinforce deck strength. This 4 wheel unit rolls smoothly on polyurethane casters.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

Made of high-strength annealed ductile iron, this steel machine roller has swivel tops that rotate 360° on chrome steel ball bearings to allow for easier turning. The rollers form a "tank track" to revolve around a center load bearing plate in the frame to provide maximum maneuverability. The weight of the load is transferred directly from the load bearing plate to the rollers, eliminating axle friction and requiring less power to start and move. This unit is virtually maintenance free.

Use this aluminum folding handle platform truck with non-marking casters for safe transportation of stacks of paper, small parts and other lightweight equipment. Ideal for maintenance rooms, offices, schools, hospitals, etc. Plastic corner protectors enhance durability and protect surroundings. The unit has a rugged aluminum construction with single handle design.

Love it, haven’t use it though. Marcelino. Phoenix, AZ. Wed Dec 02 2020

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.