Primeline A 212

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. \

Anonymous. Mon Jul 22 2024

Brass

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Wed Dec 27 2023

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

Polished Brass

Try this new and improved design that is easy to operate and add an extra layer of security to your home with this Prime-Line Door Reinforcement Lock with integral pull. Designed to withstand 800 pounds of force that provides an unparalleled level of protection! This reinforcement lock has a spring-loaded design, solid brass construction and a white finish with an additional integral finger pull for easy operation. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the door reinforcement lock comes with 3-inch hardened screws. Extra home security and peace of mind are well within reach and doesn’t have to come with the high price tag of an alarm system!

This reinforcement lock is very good quality. It was very easy to install, although I measured wrong the first time and had to move it. So, be careful and make sure you can close the door once it’s fully installed. It seems to be strong enough to withstand an intruder.. Melanie. US. Mon Mar 10 2025

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

Prime-Line MP1583 Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 72 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Anonymous. Sun Nov 02 2025

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

This standard duty capacity closer is used on out-swinging wood or metal doors. It also features an adjustable closing speed. Best used on medium-weight installations.

Chrome, 6.05" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

Satin Gray

These door viewer privacy covers are constructed of plastic and are available in two colors. They feature a large 1-1/2 in. outside diameter cover for privacy and easy gripping. This fixed security device provides privacy against the use of reverse peephole spy tool lenses, like cameras, scopes, and phone apps. Fixed door viewer privacy covers like these can be used on apartment doors, office doors, service doors, homes, dorms, etcetera. This privacy cover mounts with a base plate and two fasteners and features a self-closing cover that must be pushed upwards for viewing thru the door viewer.

Excellent choice. Maribel. Jersey City, NJ. Fri Jan 19 2024

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

These Prime-Line U 10169 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a nickel plated finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Nice to have extras in case the others fall out and get lost. Toni. Oldsmar, FL. Tue May 05 2026

Chrome

From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.

Finish matches my faucet. Looks great together. Marti. Northampton, PA. Fri May 15 2026

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Aluminum

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

This Prime-Line J 4636 Door Push is designed for use on any swinging door to help prevent scuff marks or other damage. Installation of this swinging door protector is quick and easy with the included hardware and pre-drilled mounting holes. Constructed from stainless steel with a removable PVC protective coating, this push plate has a stainless steel finish. This door protection plate measures 8 inch by 16 inch and is designed for use on 18 inch doors. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

This OEM screen door hardware kit is constructed of steel, diecast and plastic components, and it comes in a aluminum painted finish. The components of this kit can be used to replace damaged or missing hardware, or for the installation of a new screen door, or simply to upgrade existing hardware to a new color and finish. The kit comes complete with a medium-weight pneumatic door closer, and a push-button latch set with tie down. Kits like this one are designed for use on out-swinging doors constructed of wood or metal, measuring from 1 in. to 1-1/4 in. thick. This hardware can also be used on storm doors. The kit comes complete with a night lock security feature, and the closer has an adjustable closing-speed functionality. Using the installation instructions and fasteners, this kit is easy to install.

The faucet adapter Kit includes a snap-on snap-off 2-part faucet adapter and a Y-connector. Part A of the faucet adapter easily connects to a single sink faucet and can remain connected. Part B connects to Part A and to the Y-connector. The 2 split ends of the Y-connector allow connection to hot water and cold water hoses which attach to the washing machine. The snap-on snap-off feature of the faucet adapter allows for a quick one-step process to connect the water supply from the sink faucet to the washing machine. Once the washing machine has completed the laundry cycle, Part B along with Y-connector and hoses can be easily snapped off and removed from the sink faucet. Part A remains on the faucet for use when it’s the next time to use the washing machine.

Junk.. Andrea. Los Angeles, CA. Thu Dec 09 2021

This is a jalousie operator in an aluminum finish and a diecast construction with an offset crank handle. It is a left-handed design with a 4 in. link arm(center to center), and it comes with a matching aluminum finish crank handle that securely fits the 5/16 in. spindle. There are two mounting holes, 4-3/4 in. or 3-7/8 in. on the center for a more versatile fit.

This two piece strike and keeper is constructed from zinc alloy with a chrome plated finish. Mounting holes are 1-1/2 in. on center. Fits on any post size and is for outswing applications with a slide latch.

These horizontal bit key Locksets by Prime-Line Products are constructed of diecast metal and stamped steel components. The housing and keeper come in a black-painted finish, and the door knobs and rosettes come in a brite brass-plated finish to match other existing brass-finished hardware in the home. These types of locking devices are surface-mounted and do not require any mortise pockets to be drilled into the door panel edge. All systems are keyed-alike, and spare keys are available upon special order. Keyed different are not available. These locksets are for use on interior doors only, but they cannot be mounted on doors with pre-bored holes for modern-day door knobs.

Though the knob is not solid brass, for the price this is a very nice rim lock and looks great on the door in my 1852 farmhouse. It looks much more expensive than it is. I am pleased.. Alice. Madison Heights, VA. Fri Feb 06 2026

Do you have vinyl-framed single hung vertical sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your single hung sliding windows that were manufactured by BetterBilt. Each lock features a cam-type locking mechanism that mounts on the checkrail of the innermost sash and engages into the keeper on the checkrail of the outermost sash. The locks are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Each set includes one lock, one keeper, installation fasteners and simple instructions. Installation of these locks is quick and easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, cam-action fastening, and 2-1/16 inch mounting hole centers. This model is a left-hand lock, and the right-hand lock is also available under the part number F 2626. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Pieces missing and damaged box make kit unusable .. Tim. Wed Feb 11 2026

50', Blue

Transform your outdoor watering experience with Kotto's Expandable Garden Hose, the ultimate solution for any gardening or cleaning task. This 100-foot hose revolutionizes your approach to heavy-duty watering, offering 10 functional spray nozzle options for everything from pressure washing to delicate garden watering. Crafted from wear-resistant, lightweight materials, this hose remains flexible and kink-free, expanding to three times its original size under water pressure. Built with sturdy polyester and latex, this hose guarantees longevity without leaks. Its expandable and contractable design ensures easy portability and storage, fitting conveniently in the included travel bag. Featuring a soft rubber touch grip for ergonomic handling and a buckle brace for continuous spray, Kotto's water hose saves both labor and time. Solid brass fittings resist cracking, rust, and corrosion, while the ON/OFF switch valves enable water conservation and precision watering. With additional accessories like a garden hose holder, 10-nozzle ergonomic sprayer, interchangeable nozzle heads, and a travel bag, this hose is the epitome of convenience and efficiency.

I just got my new lite weight hose I got tired of pulling heavy hose up and down 14 stairs numerous times daily this a game changer. We'll made brass fittings and extra seals or o rings. Lisa. Wheatfield, IN. Thu Jun 04 2026

These bottom mounted door guides help to keep your bypassing doors on track. They feature a snap-in design that makes for easy installation. Designed for steel frame bypassing doors. Fits Cox brand doors.

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

13mm Cam

10 sets of furniture connection accessories, each set includes a fitting cam lock nut, a positioning pin connecting rod bolt, and a pre-inserted nut. Holes and combination installation are based on the external dimensions of each component.

These are not exactly like the ones that came with the dresser that were missing out of the package. But they worked. I almost got my dresser finished put together . It’s very nice dresser it’s. Anonymous. Sun May 10 2026

Zinc Plated, 15.2" H x 3.35" W x 1.35" D

This Prime-Line MP5028 Pneumatic Screen Door Closer is designed for light to medium weight wood or aluminum outswing doors. The door closing bar features a fast latch that ensures the door is latched securely. Constructed of aluminum, the automatic door closer has a black finish and is strong and durable. Comes complete with mounting brackets and attaching hardware for easy installation. This swinging door closer has a 9 inch barrel length. For further dimensional information, please see the line drawing.

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

This casement window cam handle is constructed from heavy bronze casting. It features a 9/16 in. hook projection and 1-3/8 in. mounting hole centers. This type of cam handle is typically used on steel windows and it is easy to install.

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

These universal hot and cold index buttons are constructed of clear acrylic and come with a gold colored-plating. These index buttons feature large 1-5/16 in. diameters. Use these index buttons with two-handle washerless faucets. Easy to install.

The Selectronic Urinal Flush Valves feature a self-cleaning piston design that saves time and money by eliminating routine maintenance and preventing the valve from running due to clogs. The Selectronic flush valves include a pressure compensation feature that maintains the proper flush volume regardless of inlet water pressure.

Easy to install. Works as promised.. Amy. Ealm Construction. Fri May 22 2026

Aluminum

This Prime-Line H 3959 is a universal folding crank handle that fits most casement operator crank spindles. It is diecast construction with a aluminum finish. The universal spline system fits most casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

Do you have vinyl-framed single hung vertical sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your single hung sliding windows that were manufactured by BetterBilt. Each lock features a cam-type locking mechanism that mounts on the checkrail of the innermost sash and engages into the keeper on the checkrail of the outermost sash. The locks are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Each set includes one lock, one keeper, installation fasteners and simple instructions. Installation of these locks is quick and easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, cam-action fastening, and 2-1/16 inch mounting hole centers. This model is a left-hand lock, and the right-hand lock is also available under the part number F 2625. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

Just what I needed.. Anonymous. Fri Nov 28 2025

These screen turn buttons are constructed from white plastic. They are 1/16 inch x 9/16 inch and includes screws. These screen turn buttons are typically used to attach screens and storm windows to window openings. They feature a slight offset and upturned handle that can be operated with a thumb and finger to turn and either secure or remove your screening.