Orac Decor C342bp

Primed White Plain Polyurethane Crown Moulding (10-Pack)

Designed by Orio Tonini, Orac Decor’s CX189 crown molding features a compact angular design and is designed to incorporate LED lights if desired. *Note: LEDs not included in your order* The indirect lighting profile can be used as an uplighting or downlighting system, or as general lighting. LED indirect lighting produces a beautiful glow on the ceiling and creates a warm atmosphere in your home. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Moldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use Orac Decor’s FDP500 adhesive. This interior molding also exists in a flexible form, CX189F.

Awesome product! Easy to work with and cut down. Super easy to paint!. Caitlyn. Fri Feb 21 2025

This Wall Frame is unique: a ready-made wall panel with a lot of detail for easy, fast, and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic

This elegant LED profile offers a beautiful solution to subtly incorporate indirect lighting into a classic interior.

We added to our walls, attached with trim screws for quick mounting into studs, and painted easily to match. Easy to mount, light to hold, and comfortable to cut.. Isaac. Chicago, IL. Fri Oct 03 2025

Orac’s popular C339 is a large cornice molding that combines two different design elements: flat and classical and can be used two ways: with the flat section against the wall or against the ceiling. It is made of PUROTOUCH, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp edges. Orac Decor moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. C339 is also available in Flexible form, FC339, which is ideally suited for curved walls and ceilings or creative use.

Photos before paint. Looks great in foyer with the hidden lights.. Raj. Plainfield, NJ. Sat Jan 18 2025

Orac Decor CX190 U1Profile can be used as a baseboard, crown molding, or indirect lighting profile, depending on which way you install it. When used as a baseboard, it is ideal for renovations as it can cover your existing wall molding so you don’t need to remove it. Save time and money without the hassle, mess, and waste! In addition, its inner cavity is cleverly designed to hide electrical cables. When used as an indirect lighting profile, insert LED lights (sold separately) to produce a nice glow and add a warm ambiance. This versatile molding is made of Duropolymer, a polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Moldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use our FDP500 DecoFix Pro FDP500 adhesive.

I installed slat wood in my gym and the height was 3" short of the ceiling so I got creative. I installed this crown at the top of the panelling that served as a channel for LED color-change lighting (smart lights so I could voice control). It turned out so much better than expected it's like being in a professional studio. It diffuses the light just enough and shines it up to the ceiling. I couldn't be happier with the result and it was stupid easy to install...just some construction adhesive and bam...installed.. Jenna. Highlands Ranch, CO. Tue Jan 27 2026

Orac’s popular c340 is a large cornice molding that combines two different design elements: flat and classical and can be used two ways: with the flat section against the wall or against the ceiling. It is made of pure touch, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp edges. Orac decor moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s deco fix adhesive. C340 is also available in a flexible form, fc340, which is ideally suited for curved walls and ceilings or creative use.

LOVE these moulding.. Steve. Thu Apr 30 2026

6-1/4 in. x 2-3/8 in. x 78-3/4 in. Primed white plain polyurethane crown molding (10-pack)

Eunice. Paramus, NJ. Wed Apr 09 2025

Combining contemporary styling with smart engineering, Orac Decor C356 is one of a series of newly introduced flat cornice moldings (See Orac Decor C353, C354, and C355) and has an asymmetrical profile with an extended top surface projection across the ceiling. An innovative, recessed fine shadow line optimally encompasses and utilizes the natural light within your environment to yield an unexpected floating effect between itself and your walls. Orac Decor C356 cornice molding is suited for use with other Orac moldings and millwork. Pre-primed and ready for painting or staining. This cornice molding is not available in a flexible format.

Will purchase this again. Tammy. Mcminnville, TN. Mon Nov 24 2025

You want to transform your bare walls into eye-catching elevations, or you just want to add some subtle class to your room? The new DX174-2300 case molding does the job.

First delivery rails snapped in hafe but used second ordered perfect shape Love the rails. Nancy. Wolf Creek, OR. Sat Feb 21 2026

Orac Decor 991 Crown Moulding contemporary cornice for a multitude of applications. With additional installation support, this profile can flawlessly hide curtain systems. This molding can also be used with LED lights to create the perfect mood lighting. It is made of Purotouch, a high-quality polyurethane resin created in steel molds to replicate plaster and produce crisp edges. Installation is fast and easy. Orac’s moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. In addition, moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

Using these to help add curves to a floating staircase, very easy to work with. Exactly as described.. Chase. Fri Mar 06 2026

Our new stately cornice mouldings are the perfect finish for your space. They provide an elegant transition between wall and ceiling. The new CX176 gives your space just the extra punch it needs!

Looks great. Easy to install. Very light. My hubby is a rock star.. Jonai. Niskayuna, NY. Sun Jul 05 2020

The elegant and timeless design of the SX172 makes it fit into any interior. Our skirting boards are impact and water-resistant, already primed, and easy to paint. Combine them with the other profiles in the same style to create your unique room.

Orac’s C353 Cornice Moulding combines contemporary design with smart engineering. This flat crown molding extends across the ceiling, providing an intriguing floating effect between itself and your walls, thanks to its recessed shadow line at the back. It is made of PUROTOUCH, a high-quality, high-density polyurethane resin that is lightweight and durable. In addition, it is primed white and ready for paint, glaze, or finish so it can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

What a great product! Lightweight and easy to cut with a fine blade in a miter saw. No chipping of finish when cutting. Installed a 13 x 13 room in under 3 hours with two people. Used the standard adhesive (blue tube) to secure it to a painted ceiling. Paint was sanded prior to installation. Recommend using the joint adhesive and filler (orange and yellow tubes) as the results were flawless and the effort minimal.. Anonymous. Fri Feb 13 2026

5-1/2 in. x 4-3/8 in. x 78-3/4 in. Primed white plain polyurethane crown molding (6-pack)

Looks beautiful once installed. Very happy with it.. Operations. Sun Mar 15 2026

Orac Decor C332 cornice moulding is an extra large cornice moulding that is designed for use in large scale applications, and can be installed horizontally or vertically. Made of polyurethane, it is exceptionally strong, lightweight, and easy to handle. Orac Decor’s ceiling moldings are great for renovation work because they can cover up imperfections in your wall and/or ceiling, and they are lightweight and easy to handle. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

Excellent crown moulding! The material is lightweight but feels durable. It was easy to cut and install, and it gave my room a very professional, finished look. Would definitely buy again.. Kashif Badar. Sun Feb 08 2026

Primed White Plain Polyurethane Crown Moulding (6-Pack)

Orac’s C355 Cornice Moulding combines contemporary design with smart engineering. This flat crown molding extends across the ceiling, providing an intriguing floating effect between itself and your walls, thanks to its recessed shadow line at the back. It is made of PUROTOUCH, a high1quality, high1density polyurethane resin that is lightweight and durable. In addition, it is primed white and ready for paint, glaze or finish so it can perfectly match your interior. Installation is fast and easy. Our moulding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

Fantastic crown Molding but get yourself a contractor to cut it & make the corners if you try to do it yourself your gonna make mistakes.. Martin. US. Thu Jul 11 2024

If you're intimidated by wood crown, try foam! I'm actually very impressed with how real it looks. Installing them on our laundry cabinets was a breeze. We used a simple handsaw to cut miters. Glued it onto the cabinet, caulked some seams, and wa-la! Before painting, we did a quick sand and then two coats of paint. One thing about the foam I really like is once it's painted it looks smooth without any brush strokes -- looks factory painted just like the cabinets. Highly recommend and will try our primary bedroom next.. Anonymous. Wed Apr 29 2026

Inspired by English Georgian style homes, which often incorporate pilasters as trim around doors, this is small Corinthian pilaster capital corners with flourishes of acanthus leaves and volutes. When used in conjunction with its corresponding narrow fluted pilaster shaft, the product pilasters provide a true sense of elegance and grandeur to any room. Pre-primed and ready for painting or staining.

Orac Decor’s C343 Cornice Moulding features a traditional design inspired by popular decor of old English country houses. The deep, asymmetric curve gives the crown molding an even more pronounced sense of depth for an extradimensional effect. Orac Decor’s C343 crown molding is made of PUROTOUCH, a high1quality polyurethane resin that is created in steel molds to replicate plaster and allows for crisp, intricate designs. This authentic cornice molding comes in four versions that comprise Orac Decor’s Heritage Collection: C341 (M), C342 (L), C343 (XL) & C344 (XXL). The C341 (the smallest size) is also available in Flexible form, FC341, which is ideally suited for curved walls and ceilings or creative use.

beautiful, light, easy to set up one negative is the length (only 6ft) so you do end up with more seams than i would like positive - the brand has a good selection, and the material doesnt shrink/crack as the house settles. Anja. Jersey City, NJ. Mon Mar 11 2024

Orac Decor’s CX127 Crown Moulding has a timeless profile to suit all decoration styles. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density and impact resistant. Orac Decor’s Cornice Moldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. CX127 is also available in flexible form, CX127F, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

The ceiling moulding looks very nice and makes the room look high class. Connie Johnson, Brooklyn, NY. Cornelia. Brooklyn, NY. Sat Aug 09 2025

7/8 in. D x 8-1/4 in. W x 78-3/4 in. L Primed white high-impact polystyrene baseboard molding (9-pack)

Great product. We love it.. Ken. Oakdale, CA. Sat Apr 20 2024

A decorative design, inspired by classical master pieces, adorned with fine details, that can bring back the character of a renovated house or contrasts with modern elements to enrich any setting. The C338B is an ornamented alternative to the big C338 coving, with integrated baroque motive in the middle.

Beautiful.. Megan. TX. Sun Apr 17 2022

CX123 Crown Moulding by Orac Decor has a large, traditional style profile that brings elegance to your interior decor. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density and impact resistant. Orac Decor’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. CX123 is also available in Flexible form, CX123F, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

Not a bad product. Just too small to overlay over the old molding. However, will work great in an area were we have no molding. Dj. NC. Mon Jul 25 2022

Orac’s C305 Corncie Moulding features a unique contemporary design made up of two distinctive profile shapes. It is made of PUROTOUCH, a high1quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp, intricate designs. Orac Decor ceiling moldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Our moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

Robert. CA. Fri Jul 09 2021

This large, simple panel molding is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.

Here is a multifunctional molding that is perfect as a door frame, window surround molding, or panel molding. It is primed and ready to paint the color of your choice. Adding texture to your interior, the modern multifunctional profile will enhance the atmosphere of your home while protecting your walls, windows, and/or doors. It is made of duropolymer, a specially formulated polyurethane resin that is high density, water-resistant and impact-resistant, so you don’t need to worry about accidentally damaging its surface with furniture or household appliances. Installation is extremely easy. The moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application.

Super easy to work with and install. Easy to cut down using a hack saw. Loved the way it was flexible and could fit the wall shape. Recommended adhesive worked great but I added a few finishing nails for added support. Would definitely recommended and use again. Thank you for this quality product to make my home look beautiful.. Cynthia. Aberdeen Md. Sat Jul 24 2021

5/8 in. D x 1-5/8 in. W x 78-3/4 in. L. Primed white plain polyurethane panel moulding (40 pack)

7-1/4 in. x 7-1/4 in. x 78 in. Acanthus leaves primed white high-density polyurethane crown molding (6-pack)

We painted this gold and green for the moulding in our library. Kelly. Mesa, AZ. Thu Mar 12 2026

Our Orac Decor crown moulding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This moulding features one-piece construction which eliminates the need for build-up and the possibility of post construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Dcor, which offers pronounced detailing and crisp, clean lines. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 4-3/4" High x 2-3/8" Projection x 5-1/4" Face.

Our Orac Decor crown moulding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This moulding features one-piece construction which eliminates the need for build-up and the possibility of post construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Dcor, which offers pronounced detailing and crisp, clean lines. This moulding from Orac Decor can also be used for indirect lighting applications. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 3/4" High x 1-1/8" Projection x 1-1/8" Face. It is advised on DUROPOLYMER Indirect Lighting profiles to use an aluminum tape on the inside of the profile or an aluminum LED support to avoid the light showing through the moulding.

Orac Decor’s best-selling CX109 cornice molding has a contemporary design featuring a simple curve, with a crisp line at the bottom. It is made of Duropolmer, a specially formulated polyurethane resin that is high-density and impact-resistant. Orac Decor’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. The CX109 is also available in Flexible form, FCX109, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

This is my third order of polystyrene molding. I love it. And it’s easy to cut and easy to handle.. Julie. West Grove, PA. Sun May 28 2023

Orac Decor C391 Cornice Mouldings for Indirect Lighting or Curtain Profiles features a modern staircase design. It is perfect as an original, modern cornice or as a practical solution for hiding a curtain rail or LED lighting. The chamfered corners at the top and bottom also create a subtle line of shadow that further accentuates the linear pattern. It is made of PUROTOUCH, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp, intricate designs. Orac’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. Distributed in the USA exclusively by Outwater Plastics, LCC, and Architecture by Outwater, LLC.

Love it, love it , love it. My ceilings look so great and modern.. Tatiana. Bayside, NY. Sat Jun 12 2021

Our Orac Decor baseboard molding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This molding features one-piece construction which eliminates the need for build-up and the possibility of post-construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Décor, which offers pronounced detailing and crisp, clean lines. Our Orac Decor baseboard molding offers high-impact resistance and can be used in high-trafficked areas. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 4" High x 1/2" Projection.

2 in. x 7-1/4 in. x 78-3/4 in. Primed White Plain Polyurethane Crown Moulding (8-Pack)

Orac Decor’s C396 “Steps” can be used in 4 different applications (as shown): curtain moulding, crown moulding and indirect lighting profile. LEDs sold separately. Curtain profiles hide curtain rods, allow for continuous trim along an entire room and are an elegant solution for floor1to1ceiling windows. Crown mouldings can visually enlarge and add style to an interior. Our molding can also be used as an indirect lighting profile by incorporating LED lights. Indirect lighting produces a beautiful glow on the ceiling, creating a warm atmosphere. It can be applied as uplighting, downlighting or general lighting. This versatile molding is made of Purotouch, a high1quality polyurethane blend, produced in steel molds to ensure consistent, crisp lines. It is impact resistant, water resistant, lightweight, easy to handle and paintable. Integrated glue grooves ensure easy installation. Full warantee when you use Orac Decor FDP500 adhesive.

These came out beautiful! They are light and easy to cut. Once they're installed and painted, you would never suspect that they aren't wood. I would buy these again!. Regina. Boston. Tue Nov 25 2025

This richly decorated corner adorned with acanthus leaves embodies a classical style and can enrich any interior. Ideal for use with C338. C338A, C338B and P3020. It is made of purotouch, a high-quality polyurethane blend that is lightweight, strong, and provides realistic detailing and deep reliefs. Installation is fast and easy. The moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application.

I was a little confused at the beginning when I got them because for some reason I thought I will get the whole square to install on the wall but they actually sent me only the corners (thank God I bought 4 of them, if you buy one piece only one corner you are going to get) and I wanted the rest of the molding to create a square on the wall. Fortunately I found the rest of the molding to make my vision happen but I have to buy it separately. Anyway, the corners are pretty big, I imagine something smaller but I actually like how big they are, the design is going to be really visible for everyone, that’s awesome!!. Maria. Chicago, IL. Sat Jan 01 2022

7/8 in. D x 4in. W x 78-3/4 in. L Primed white high impact polystyrene baseboard moulding (20 pack)

Slavek. Sun Feb 09 2025

Manufactured with a hard, strong surface that can withstand the rigors of any environment, Orac Duropolymer® Flexible CX123F cornice moulding exemplifies the traditional theme of Orac Decor.

Orac Decor’s C900 Cornice Moulding for Indirect Lighting is a large up1lighter lighting trough inspired by Ovolo architecture, a convex, quarter-round molding that is ideal for larger rooms. It is uniquely designed to incorporate compact LED or fluorescent lights. Producing a beautiful glow on the ceiling, this creative uplighting system adds a warm atmosphere and depth to a room. Indirect lighting can also be used as general lighting. Orac’s Mouldings for Indirect Lighting can just as easily be used without lights, if desired, making them adaptable to any space. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze, or finish. C900 is also available in Flexible form, FC900, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

Excellent product with easy install.. Jay. Hutchinson Island, FL. Mon Apr 14 2025

Primed White Plain Polyurethane Crown Moulding (11-Pack)

Easy to install, light weight, added extra molding on outside to cover glue underneath but also added more of an atheistic look.. Carlie. Denver, CO. Thu Mar 26 2026

Inspired by the 1930s, the rounded but austere design of ‘The Boat' profile creates a lovely interplay of light and shadow on walls and ceilings when used with LED or fluorescent indirect lighting. Horizontal and vertical lines smoothly merge into each other, producing an attractive shadow line. It is made of PUROTOUCH, a high1quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp edges. Orac Decor mouldings come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Our moulding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

Worked great. Cara. NH. Tue Oct 10 2023

Orac’s CF373 Flexible Moulding for Indirect Lighting was designed by award1winning designer Ulf Mortiz and consists of 2 modern profiles. Intended to enhance and modernize the existing architecture of your interior, it can be used to cover up imperfections and crevices in your wall or ceiling, as a crown moulding, panel moulding, or baseboard. Orac’s Flexible profiles offer great versatility and are far superior to anything one could achieve with timber or plaster. Get creative with your walls and ceilings push interior design to the limit with rounded lines, circles, and curves. This moulding conceals LED indirect light and creates subtle lighting effects by playing with light and shadow. Indirect lighting will bring warmth to a room as it adds a beautiful glow to the ceiling, eliminating the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run, long1lasting, and eco1friendly. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze or finish. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

Primed White High Impact Polystyrene Baseboard Moulding (36-Pack)

Featuring a richly curved design, this multifunctional molding can be used as a door frame, window surround molding, cornice molding, or panel molding. A great way to add texture to your interior, this versatile profile will enhance the atmosphere of any room while protecting walls, windows, and/or doors. In addition, it comes pre-primed and ready to paint the color of your choice. It is made of duropolymer, a specially formulated polyurethane resin that is high density, water-resistant, and impact-resistant, so you don’t need to worry about accidentally damaging its surface with furniture or household appliances. Installation is extremely easy. The moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application.

Strong and sturdy but looks very fake. I would need to buy all plastic for trim to match. I will stick with real wood for my chair rails.. Carrie. US. Tue Oct 29 2024

The soft baroque curls and minimalistic design of the PX120F meet up to integrate past and future. Not avant-garde, not antique, simply unique. This profile can be used as a baseboard cap to finish off the bottom of baseboard, especially when the floors are not even and can be used as panel moulding to create wall frames or wainscoting. The PX120F is the big brother to the PX103 and works well in conjunction with the SX118 baseboard moulding. The PX120F is also available in our signature Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all.