One of the easiest ways to fill a blank wall is to put up a wall decal. A wall decal, or a decorative vinyl sticker, is easy to apply and will last for several years – all without leaving a mark. Use a wall decal to add whimsy to a nursery or visual interest to a living room wall. Read on to learn how to apply a wall decal so it lasts for years to come.

---

What You'll Need
How to Apply a Wall Decal
Tips for Applying Wall Decals

---

What You'll Need

• Tape measure
• Cloth/sponge
• Water for cleaning the wall
• Painter's tape
• Level (optional)
• Pencil for marking (optional)
• Soap (optional)
• Rubber squeegee (if not included)

Once you've picked out the right spot, follow these five how-to steps to learn how to apply wall stickers.

How to Apply a Wall Decal

Installing a wall decal is much easier than you think! Review these steps to ensure your success.

1. Take Measurements

Check the measurements of your decal and pick out a space you think it would fit. Measure the wall to make sure your decal is the right size before you begin applying.

2. Clean the Wall Surface & Let Dry

Using a damp cloth or sponge and soap, clean the surface of the wall. Wipe away any dirt or dust. Make sure you clean the wall thoroughly – if there is dirt or oil left behind on the wall, the sticker will adhere to that instead of the wall itself. The wall must be dry before you begin to apply the decal, or it will not stick properly.

3. Practice Positioning the Wall Decal on the Wall

Decals can be difficult to reapply once you’ve used them, so make sure you have your position right on the first try. Try taping the decal in the desired position, so you can take a step back and examine the placement before you apply.

4. Use a Level to Make Sure the Wall Decal Hangs Evenly

Once you choose a location for your decal, use a level to make sure it is not tilted. While the decal is taped to the wall, take your level and line it up along an edge of your decal that you would like to be horizontal. Adjust the level until the bubble is centered. Using a pencil, you can draw a light line under the level to help you reposition the decal. Feel free to retape the decal to line up with the horizontal line and make more guide marks with your pencil.

Once you have finished marking the decal’s position, you can untape it from the wall and get ready to apply.

5. Apply the Wall Decal to the Desired Spot

Remove the back of the wall sticker so the sticky side is exposed. Place the decal in the desired location with the sticky vinyl against the wall and the protective paper cover over the design facing you. If you make a mistake, slowly peel the decal off the wall and reapply.

6. Get Rid of Any Air Bubbles

Once your decal is on the wall, you’re going to want to eliminate any air bubbles. Start at the top of the decal and work your way down. Smooth the surface and eliminate any air bubbles with a squeegee. Repeat twice to ensure the decal is free of air bubbles and is securely adhered to the wall.

7. Remove the Protective Paper Layer

Carefully peel the protective paper on the design from the decal. To do this, you'll want to start at one of the top corners and slowly peel back at a 45° angle until it's all removed.

8. Enjoy!

And voila! The decal will stay up until you're ready for a change.

Tips for Applying Wall Decals

Here's a couple tips to help make your wall decal application seamless:

• If the paper backing is stuck to any piece of the decal, simply dampen a paper towel with water until it's lightly saturated. This will help release the decal from the paper backing.
• Wall decals can be applied most efficiently in a room between 60° and 80° F. If your room is outside of this temperature range, try to adjust the temperature while you are applying to help your decal stick properly.