Door Hardware

【Package Quantity】 20PK 【Drive Style】 Phillips

• Product Type: Shutter/Door Accessory
• Overall: 0.02'' H x 0.03'' W x 0.06'' D

1/2" black pipe cap fitting - our fixture displays malleable iron cap fitting providing you with great pipe fittings at a very affordable price. Perfect for DIY - whether you're looking to build a pipe shelf, pipe towel rack, or pipe lamp, our pipes and connectors are up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water. Raw iron - malleable iron is raw, unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron it's normal for your hands to get dirty. Check out other fittings and pipes: Https://www.Fixturedisplays.Com/index.Php?Route=product/search&search=1507 Https://www.Fixturedisplays.Com/index.Php?Route=product/search&search=1509 Https://www.Fixturedisplays.Com/index.Php?Route=product/search&search=1510 For your convenience here is a link to the assembly video: https://youtu.Be/siq2k3i2czi. You can also search“15101 fixture displays 12 black pipe end cap round cap plumbing not thread instructions” on youtube to locate the video. You can also download the video by following this link: http://www.Fixturedisplays.Com/video/15101.Avi

• Product Type: Shutter/Door Accessory
• Overall: 0.06'' H x 0.11'' W x 0.11'' D

Application: lightweight bi-fold doors / residential interior wardrobe and storage room Material: high-quality steel, pine wood, nylon Surface finish: zinc plating Fit for bi-fold door:7/8-inch to 1-3/8-inch thick and up to 30-pound each Package included： 1 x upper pivot pin 1 x lower pivot pin 1 x guide for track 1 x snugger 1 x aligner(used on double sets only) 1 x lower pivot bracket 1 x track bracket(joiner) 1 x knob 3 x hinges Screws and assembly instructions Steel track & guide not included

This nylon-constructed guide bracket houses a 5/16 in. Flat-edged brass roller. The nylon housing holds this roller into the bottom of your rail. Used on Elco/Century windows. Easy to install with a few simple tools in a few minutes. Installation of this roller will make the slide action of your window improve. A Phillip's head screwdriver is required for installation.

• Install 2 per window
• Thread type: Deep. Point style: Sharp
• For further dimensional information, please see the line drawing

Door Pulls from Agave Ironworks’ Hardware Line sold exclusively through Acorn Manufacturing and our dealer network. The Hammered Square Bar Pull is a great accent to any door in the colonial or old-world style. Made from forged iron and finished in Agave’s flat black powder coat. Measures 1-1/2” x 9-1/2” with a 2-3/4” projection.

• Heavy Duty
• Hand Forged
• Powder coated in flat black

Artesano Iron Works Hammered & Twisted Door Handle / Cabinet Hardware is a piece of handmade exclusive Wrought Iron hardware with a natural, oxidized, or black iron appearance that is full of character. This 8 1/2" L Pull is the perfect choice for dressing your Door/Cabinet/Drawer and inspires a traditional/Classic Style. A perfect piece for your desired design and unique enhancement to your furniture.

• Product Type: Door Hardware
• Overall: 8.5'' H x 2.25'' W x 1.75'' D

We purchased these for an outdoor rustic cabinet my husband built for our new tiki bar. The handles are in the bottom right of the photo.They are just perfect for this type of door. Jeanne. Greenwood, IN. 2021-10-25 19:37:00

This patio door handle is a surface with clamp latch style. Used exclusively by International Windows on their 950 series patio doors. It mounts on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. The clamp is unique due to its teeth like design. It has a 2-1/8 in. inside handle height. Mounting holes are 3 in. on center. It is non-handed and can be used on either right or left-handed doors. The outside handle is a non-keyed black flush mount made of extruded aluminum. Purchase Prime-Line part E 2000 to key this unit.

• Product Type: Shutter/Door Accessory
• Overall: 11.5'' H x 5'' W x 2'' D
• Outdoor Use: Yes

Door knocker for your home

This Prime-Line GD 12231 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. See the Product specifications found in Prime-Line’s Torsion Spring Selection Guide to assure that the proper replacement spring has been selected. Constructed of steel and finished in black with a white painted end, this is a regular-duty garage spring with an estimated lifetime rating of 10,000 cycles. Left hand wind springs are mounted to the right of center (as viewed from the inside the garage looking out). When dual spring installations are involved, it is important to replace both springs. This replacement garage spring can cause serious injury if not handled and installed properly. The spring has a 0.250 inch wire size x 1.75 inch inside diameter x 32 inch overall length. For further dimensional information, please see the line drawing.

This Privacy Lock with Pull Pocket Door Hardware comes plated in satin nickel. It includes a die cast pull hook. This pull comes complete with fasteners for a quick and easy installation.

• Product Type: Pocket Door Hardware
• Overall: 2.75'' H x 2.5'' W x 1.375'' D

Using this in one bath and one bedroom 9n the silver color ( Satin ?? ) both PRIVACY. I realize now that I will not need the privacy for the closet, but I am adding more pocket doors to the house , so I will swap it out. . I Will order more for a client, I have to check if it comes in matt black.. Aggie Modiano Design Inc.. Canoga Park. 2021-02-08 17:21:13

This bi-fold closet door pivot and bracket repair kit includes components constructed of steel and plastic, and fits 3/8 diameter holes. It includes one Prime-Line part N 6543 jamb and floor mount pivot bracket, one Prime-Line part N 6673 bottom pivot, one spring-loaded 7/8 in. diameter Prime-Line part N 6703 top roller guide, one spring-loaded Prime-Line part N 6700 closet top pivot with 1/4 in. diameter pivot, one spring-loaded Prime-Line part N 6672 closet top plastic pivot with 3/8 in. diameter pivot and one Prime-Line part N 6606 top pivot bracket. These repair parts are used on bi-fold doors manufactured by Acme, Alliance, Kenna frame and many others. Use these components to replace damaged or missing hardware to restore a bi-fold closet door system to optimal performance. Used on doors 1 to 1-3/8 in. thick and up to 50 lbs.

• Product Type: Shutter/Door Accessory
• Overall: 9.3'' H x 3.75'' W x 1.45'' D

Make a great first impression with our replica on front door or garden gate! Our quality authentic foundry our hard to find dragon door handle is truly for a one-of a kind castle! The dragon's body bends to "become" the handle in this long detail that's sure to add just the finishing touch. Replicated from a 19th century antique exclusively for Toscano, our foundry cast iron piece is a unique find.

• Product Type: Push/Pull Plate
• Overall: 12'' H x 3'' W

Gorgeous for my theather doors!. Nancy. Gainesville, VA. 2020-03-22 09:48:25