Best Printer Stands With Reviews

The quality of this tool chest is outstanding. It's thicker metal than I thought it would be. I got the lime green and it's absolutely beautiful! It arrived well-packed with no damage. The casters are good quality. Note that the bolts for the casters were already screwed into the bottom of the chest. I had thought mine were missing then I realized they were there. The doors run and close smoothly and the lock seems strong and substantial. The various-sized drawers allowed me to easily store my most commonly-used tools in an organized layout (i.e. plenty of room for the average homeowner's tools). The bottom cabinet door lifts and is pushed in - it is not a drawer like the top 4 drawers. The bottom cabinet easily holds my drill (in case) a set of extra bits, a mitre saw, a circular saw, some wood glue, and there's still some extra space. This is definitely worth the money and is something that you'll likely keep and use a lifetime. It's the quality we used to be able to buy decades ago It comes with a lifetime warranty.

This is a product as advertised. Convenient under table model that is sturdy and comparatively easy to assemble. If you've never assembled anything, this is a great starter project. Instructions are clear and the pieces are easy to assemble. Aligning the holes for the screws is a little fidgety but just requires a little pressure and patience. My only major criticism is that the wrench provided to tighten the castors does not fit properly. However, you should be able to hand tighten to a degree that is satisfactory. I placed two heavy auxiliary power units on the top and it rolled easily across carpeting. Nice product.

The printer stand is great. I was a little disappointed with the finish on the drawer front. There was a very small bit of unfinished area. Fortunately I was able to touch up and blend with some furniture touch up markers rather than return and wait for another stand. Other than that, it was perfect for my needs. It took about an hour to assemble.

My husband and I are now working from home due to Covid-19. Our only available space to work is our dining room table, which we share. We ordered the stand to keep our printer and papers off the floor, and its done a great job of helping to stay organized while freeing up some of the space in the room. Its solidly built and took about 15-20 minutes to put together. I like that the wheels lock to keep it in place, and that the the top is a solid plastic surface, perfect for housing the printer and other things you dont want falling through the wire shelving. Were very happy with our purchase.

Very happy with this purchase. It's super sturdy and makes it easy for me to move my large office printer around. It also has a ton of storage in the bottom. I can easily store two cases of printer paper on the bottom shelf alone. My only complaint would be that the front frame came bent. I was able to bend it back and make it work (easier than ordering a replacement part), but I would expect for this price for it to be pristine. Also, a warning, when you install the side panels (one of the first steps). Make sure they are right side up. I couldn't tell from the pictures which way they are supposed to go, but when I later went to install the shelf it became clear I had installed them upside down. I had to take everything apart and turn them the right way around to make it work. For clarity, the brackets for the shelves are shaped like clips, and the clip part should be facing upwards like a coat hook. The shelf has a thin part in each corner that hooks onto these.

Finding a short printer stand that's wide enough to support a business class, high production printer wasn't easy. We run 4 cassettes on our laser printers and I needed to meet a headroom requirement for the niche that one of them sits in. It doesn't look like much, but the steel construction is very rigid. It has held up for several months with 50 lbs of printer on it and it hasn't become wobbly at all.

I bought this cart to put my photo printer on and wheel it out of our closet when we want to use it. Cart arrived without any damaged parts. Very sturdy and quite functional. More attractive and sturdier than I expected. Was not difficult to assemble but you do need to apply pressure in the right spots to ensure that you don't cross thread the screws. Perfect for my intended use.

We went from a six foot table to this ultra space saving 29.5” wide stand! Perfect for our copier on the top self, fax machine on the middle shelf with room for paper and binders and our color printer on the bottom shelf again with room for paper and extra toner. I was nervous of the weight with plastic casters but we locked the wheels and if feels very sturdy. Love that that the shelves are adjustable to fit our needs.

I am well satisfied with the printer stand. Solid, easy to assemble and will be used for the purpose intended. My only complaint is with the delivery service that was used. I believe it was UPS. The cardboard package was slightly scrunched on one corner. When I opened the package, the interior packing was sufficient for the item. However, the package had been dropped on that corner. It resulted in the top laminate on the round corner of the shelf being scarred and an area of the tan wood shelf exposed from under the black laminate. I had to set up the printer for immediate use and did not have time to return the item. And of course, the damaged corner is one that the printer does not cover. No complaint in regards to item, only for the delivery company.

Need this for printer on top, CPU on bottom. No one (not even mfg co) shows the height of lower shelf. At 16.25" it's about .75" too short. Will swap CPUs w/ another employee which actually is a smart move, tech-wise. Don't care about wave design. Just needed a unit that would fit in the available space. This was the only one I found.

Excellent product. Height is perfect. At just 1/2" inch below the top of my desk it fits up against it perfectly. My paper shredder fits right in front of the desk and the drawer still opens easily over the top of it. The drawer easily holds more than a ream of paper. The shelf is perfect for extra paper (beside what can be put in the drawer and I can also store the bags for the paper shredder and the cleaning/sharpening oil on the shelf as well. I am well pleased with the quality and appearance of this printer stand.

Works great to hold a large Brother laser printer. The stand is sturdy and the casters are great for sliding the stand away from the wall to service the printer. Assembly is straightforward provided you take your time, read the instructions carefully, and ensure the pieces you are assembling are oriented the right way according to the diagrams. Fit and finish is good for the price. The drawers are too deep and narrow to make full use of it. I would have preferred three or four shallower drawers. Overall, a good purchase that met my needs.

Perfect to fit printer and laptop docking station under a desk. Very sturdy, easy to put together, and has varying heights. I have an HP OfficeJet 9000 series on top, and my laptopdocking station on the bottom. My only criticism is that the top was a little slippery for the printer so I just got a rubber dish mat. Perfect, cheap solution.

It is pretty sturdy. I love the flexibility. It is like building with legos - not hard and you can chose to use pieces of different heights depending on high you want it to be overall, or how high you want the shelves to be. Very well packed in an inner and outer box. It is flat packed so it isn’t too large. It would be easy to move. The quality seems good. I have an Epson 3460 all in one printer and it is a little deeper than this but you can barely notice the overhang and it is still steady, even using the casters. I’m very happy with this. I’d recommend it over many of the others I considered as the extra width is nice.

[This review was collected as part of a promotion.] I was pleasantly surprised by the quality of this printer stand. It’s made with a thick and sturdy MDF that doesn’t chip and feels really solid. Assembly was straightforward and easy to follow. We didn’t put up the castors because we put int on our home office and didn’t want the kids to move it around. The size is also great, it fits in a ton. And because the shelves are so sturdy I didn’t have to worry about it holding up to 3 teams of paper. Overall, highly recommend!

This is an excellent product! It is 95% real wood. All screw holes match up perfectly and it is as solid as a rock once assembled. Real wood is much more forgiving than particle board, so fixing assembly mistakes are possible without having the breaking and crumbling of particle board. This product was not made in China. The only complaint is that the instructions were not great and the pieces were not labeled. This would have made for faster and a more mistake free assembly. I had to unassemble and reverse parts a couple of times because I had installed them backwards. This is where real wood made a difference. Had it been particle board it would have made blemishes and weakened the structure putting it back together. It is a beautiful piece you can be proud of.