For commercial and institutional application such as stores, schools, offices, transportation terminals, churches, entrance ways. Units can be wall or ceiling mounted, surface, semi-recessed or fully-recessed. Features:
- In-Built thermostat - 50-90°F range that can be bypassed to use remote wall thermostat
- 24v transformer and relay
- Disconnect switch
- Replaceable dust filter
- Two speed (1,550 / 1,400 rpm), shaded pole, resilient mounted, permanently lubricated fan motors
- Heat output and fan speeds controlled independently
- Beige powder coated finish on 18 ga. steel housing - 9.5" Deep x 25" High
- Steel sheath finned tubular elements
- Easily removable fin and element decks for simplified maintenance
- Full length capillary automatic reset thermal protection with secondary manual reset
- For commercial and institutional application such as stores, schools, offices, transportation terminals, churches, entrance ways.
33" Duct Collar
- Heater Length: 33"
- Low: 10,239 BTU's
- High: 17,065 BTU's
- low: 15.4/9.2 AMP's
- High: 25/17.6 AMPS
- low: 230 CFM
- High: 250 CFM
- Volts: 208
- Phase: 3
- Weight: 99 lbs
- Overall Dimensions: 25" H x 33" W x 9" D
33" Recess Trim Frame
- The same model is used for the inlet or outlet. If duct collars are required for both inlet & outlet then 2 must be ordered
- Size: 33"
- Recessing Trim Frame should be ordered to "trim-out" any recessed or semi-recessed installation.
- Size: 33"
We're sorry, we have no additional specifications for this product.