Generac Power Manager Load Shedding Service Disconnect Transfer Switch - RTSJ200A3

The PowerManager LTS is designed to allow the most efficient use of the generator by monitoring and managing the backed up essential and non-essential circuits. If the generator approaches overload condition, the non-essential circuits are cycled off, allowing essential circuits to remain powered. It features a built-in, 16-circuit priority load center, a main contactor that protects the essential circuits and a secondary contactor that protects non-essential circuits. The service entrance-rated, NEMA 3R outdoor/indoor-rated enclosure has a side-opening hinged cover and conforms to 2008 National Electrical Code sizing standards

Features:

• Housed in a Nema 3R steel enclosure
• Electrostatically applied powder paint
• Service entrance

Specifications:

• Utility voltage drop-out: <65%
• Timer to generator start: 15 seconds
• Engine warm up delay: 10 seconds
• Standby voltage sensor: 90%
• Utility voltage pickup: >80%
• Re-transfer time delay: 15 seconds
• Engine cool down timer: 60 seconds
• Exerciser: 15 minutes every 7 days
• Load Transition Type: Open Transition
• Withstand Rating (Amps): 10,000
• Lug Range: 400 MCM - #4
• External Dimensions 120/240V, 1 Phase: 23.5 x 15.9 x 7 in.
• Designed to operate with a Generac R-series controller
• UL 1008 listed for standby operation