|Product Type: Standing heater||Material: Stainless Steel|
|Hardware Material: Steel||Heat Source: Propane|
|BTU Output: 46000 BTUs||Ignition Type: Piezo ignition|
|Fuel Capacity: 20 Pounds||Fuel Included: No|
|Heat Range Diameter: 18 Feet||Safety Shut Off: Yes|
|Pilot Light: Yes||Tip Over Shut Off Safety Switch: Yes|
|Anti-Tilt Safety Device: Yes||Portable: Yes|
|Wheels: Yes||Lighted: Yes|
|Indoor Use: No||Commercial Use: Yes|
|Eco-Friendly: No||Product Care: Clean with soft cloth once cooled down|
|Country of Manufacture: China||Powder Coated Finish (Mocha / Stainless Steel, Mocha, Hammer Tone Bronze Finish): Yes|
|Assembly Required: Yes|
|Product Warranty: 1 year|
|ETL Certified: Yes||CSA Certified: Yes|
Great performance, Good price.
Michael from Providence, RI – Verified Buyer
We are happy with our purchase of this heater. We are using it in a confined space and the heat production is what we were looking for. We would buy this product again if we were to be looking for it again. Appearance of base and pole are good quality, access to propane tank is easy for an adult but not for a child, as it should be. Lighting is fairly easy though it takes some practice to understand the purging of air and lighting of pilot process. Adjustment of flame/heat is easy. In still air, heat distribution is about 8 feet in all directions. In light wind, cut that down to 4 feet. Some type of wind barrier, more than 8 feet away, is advisable, though certainly not any flammable material that could blow up to the Heater. It is a live and massive set of flames after all. Product description should include requirement that clearance above the top of the heater should be at least 3 feet away from any enclosure, such as a ceiling or roof. Item height is approximately 7 feet. Assembly instructions suggest 60 minutes for assembly. I am handy with assembling items. I am an avid reader of instructions, perhaps to a fault. Reading and following the instructions provided was slightly challenging. Actual assembly time approached two hours, in part due to a short work stoppage to remove a small metal splinter earned while screwing in one of the screws provided. Once assembled, product appeared as expected and performed as expected. We are pleased with this purchase and would repeat it. The following are recommendations to consider during assembly. You may not need to read on if you are only at the point of considering the purchase. Package Contents: Note that you will find you have an extra Anchoring Arm and Pin. I presume they provide it in case you choose not to use the Wheel Assembly. Unfortunately, the instructions fail to note this. Step 3: Cylinder Holders: instructions should point out the obvious, that these are designed to screw INTO the sides of the propane tank to hold it secure. Also, assembler is advised to note positioning of support arm holes versus cylinder holder holes since you may want to put a support arm on first if it is right behind the cylinder support holes for that location. Step 9: Removal of plastic wrap from reflector shield parts: Give this to someone elsed to do while you are assembling. It takes much too long! Also, note that one of the parts has a sticker UNDER the plastic wrap which also needs to be removed. Step 10: refers to Barrel Bolts. Know that these are also called Reflector Studs on the packaging.
Works fabulously for a chilly evening area
Shannon from Fidalgo Island, WA – Verified Buyer
We recently purchased this patio heater after having looked at them for several years and deciding that we were going to redecorate our small back patio. We live at the base of the San Juan Islands in Washington State (the nice Washington) and once the sun begins to set and the cool marine breezes begin, there's a definitive chill in the air. For those of us who love the outdoors and are not ready to retreat inside, this heater provides a wonderful excuse to stay outside. We've used it twice in the last two weeks and it works fabulously for a chilly evening. We have a thirteen by ten foot patio space that adjoins our drive and garage area providing a newly created small seating area and this propane patio heater does a fantastic job of radiating enough heat to sit, relax and share a bottle of wine while chatting. We would absolutely recommend for purchase.
I worried for the wrong reason
Edmund from Denver, CO – Verified Buyer
When I got this for such a reasonable price, I assumed that it wouldn't last. Or that it would be poorly made. Both could have not been further from the truth. It IS well made and it HAS lasted and lasted through summers and winter, outside in the elements the whole time. No rust. No wear. And it uses very little propane. Sorry that I waited so long to buy it.
Good Looking and Easy to Assemble
Eric from West Roxbury, MA – Verified Buyer
This propane heater is good looking and is made of heavy grade metal. It was pretty easy to assemble, only took me about 35 minutes and I was up and warming. Definitely throws off some good heat but do plan on being realistic about its capabilities. I've got a 15 x 20 deck and I can feel the heat from everywhere on the deck, but it is certainly warmest within 5 feet of the heater. If you've got a breeze this is going to be useless to those upwind of the heater. My wife and I comfortably had dinner outside on a night where it was about 55 degrees, but much colder and it wouldn't have been comfortable without blankets. All in all a good purchase and I'd buy it again.
Looks great and more importantly, works great
Elizabeth from Glendale, CA – Verified Buyer
I was looking around for awhile to find a nice looking but not too expensive patio heater. The ones at the large home improvement stores were a little dinky looking. I read the reviews on this and from the photos it looked sturdy and attractive. The thing arrives in a million pieces and it's a bit like putting a jigsaw together but if you are organized and patient it is easy. My husband and I did it together and it was complete in about 45 minutes. My only negative is that the instructions for lighting are more confusing than they need to be. The thing also has a pilot light but we don't use it as we use the heater infrequently depending on the temperature here in southern California. Pros: Sturdy and attractive Cons: Instructions complicated
Pretty good little gadget
Steve from Texas – Verified Buyer
I haven't had a chance to use this yet. It's still been over 100 degrees most days out here in Texas. But I did get it all put together and ready to go. Let me tell you, assembly is a bit of a project. That head is very heavy and the stainless steel that you have to screw into is very light. I'm going to have to super glue some nuts on the back of it to get those screws to hold it a bit tighter. I thought I'd be able to take it apart to store it. Ya know, where you see those two posts come together But once you get those two posts together it's impossible to take them apart. It just can't be done. It looks great and it's very tall. For under $150 bucks I'm pretty impressed. Can't wait for it to cool down so we can use it.
Appropriate for What I Need
Peggy from Silver Spring, MD – Verified Buyer
I love how easily these start. My family was here for Thanksgiving and it wasn't particularly warm, but the kids were able to do bean bag tosses and play around in the yard to get them out of the house. And I like sitting on my deck for coffee on a cool morning or a glass of wine on a cool evening. Also, they look nice enough to leave outside. Pros: Work Great!!! Cons: Even with the propane tank inside and full, a wind gust can blow them over and dent the hood. I now bungee cord them to the deck railings when not in use.
Great Outdoor Patio Time
Bradley from Spokane Valley, WA – Verified Buyer
Living in the northwst and enjoying outdoors and evenings, we needed a little assistance in keeping warned. This is the ticket! We make fewer trip to the wood pile, but now enjoy both, a larger area of warmth and the light and heat of our fire pit. The patio heater feally filled the walking and table sitting area with the right amount of comfort. My neighbors love the idea and are looking for these, of coarse I told them where to get the best deal, "See Wayfair" I say to them all. Great deal and great service from Wayfair. Thank you Wayfair! Brad K
Great heat and great price!
David from Colchester, VT – Verified Buyer
Assembly wasn't bad, took about 30 minutes, the heat it hives off is great, when it's not windy. I'm very happy with this product.
Susan from Bellingham, WA – Verified Buyer
This patio heater was not easy or quick to assemble. One package of hardware was found taped to the plastic wrap instead of the bag that held all the other hardware. For a while there we thought we were going to have to head to the hardware store. The heater arrived with a big dent in the propane tank cover. Grrrr... Once it's put together though it works well and provides lots of warmth!