Home Improvement Home Theater Mounts & Screens Flat Panel TV Mounts

All TV Mounts

  Brand:

Peerless

 
  clear all

Featured Reviews
<strong>Peerless</strong> SmartMount Aluminum Articulating LCD/Plasma Wall Arm for 37" - 63" Screens Peerless
Peerless SmartMount Aluminum Articulating LCD/Plasma Wall Arm for 37" - 63" Screens

 4 stars

I ordered the mount to hold my new Samsung 60 inch plasma, which weighs about 150 pounds. I wanted to mount it over the fireplace in the niche that seems to be standard in most new homes these days. The TV has about 1.5 inch clearance on both sides and about 3 inches on top and bottom. So, the TV needed to be mounted exactly in the center of the opening. In addition, the niche is about 24 inches deep, so I had to get an articulating mount. I checked various websites and Wayfair had the best selection/price combination. The SmartMount mount was easy to install onto the wall, although the studs to which it was mounted were not centered on the niche opening. No problem, once the base was mounted to the studs the articulating arm plate slide left/right enough to center the arm on the niche opening. The mount uses six large lag bolts to mount into the wall studs and is rated for 200 lbs. I weigh 160 lbs and did several pull-ups on the mount before setting the TV in place. The mount is sturdy and did not flex much if at all. My only complaint is the mount hardware that attaches to the back of the flat screen. The bolts provided to attach the bracket to the TV were small and barely reached through the mount into the TV. With a 150 lb TV worth several thousand dollars riding on those six bolts, I decided to visit [...]and get longer hex head bolts. The bolts were an odd size but the helpful person at HD was able to track them down. The other issue is that the TV does not slide up/down enough. In other words, the mount does not allow enough travel for adjustments up/down. The mount is centered on the wall of the niche, but the mounting holes on the TV are off center a bit. I maxed out the travel allowed on the TV mounting bracket, but the bottom of the flat screen still sits on the bottom of the niche when the TV is tilted forward. Not a big deal and I should have compensated in my measurements for the off center TV mounting holes, but I think the bracket could have been larger. It took two of us (inexperienced at mounting flat screen TVs) approx. three hours from unpacking to setting the TV in place. It looks great, works well and I am very pleased."..."  Read more
- Rich in Falls Church, VA

<strong>Peerless</strong> SmartMount Universal Tilt Mount 32"- 50" Screens Peerless
Peerless SmartMount Universal Tilt Mount 32"- 50" Screens

 4 stars

My Philips 32" LCD was 21½ inches tall, and I had 22½" above a closet door to fit it in my small bedroom. I spent about half a day measuring and calculating the exact spot to bore the holes for the rack. After installing the rack, I mounted the TV onto it, and it cleared the ceiling and the top of the door by a half inch each. BUT, after putting the TV at the proper angle and tightening all the set-screws etc., the TV was 1/4" too low and the top of the door hit it when opened, and there was about a 1" gap between the top of the TV and the ceiling. I took the whole thing down, plugged the holes that I had made, drilled new holes about a half inch higher, and put it up again. That worked just fine, EXCEPT THAT after a few minutes in that position the TV again came down about 1/4" or so, and the door scraped the bottom of the TV. I THEN DISCOVERED WHAT TEH PROBLEM WAS: The top bolt HOLES attaching the TV to the mount were OBLONG rather than round, and (following the instructions!) I had been careful not to over-tighten the bolts), but obviously I had not tightened them sufficiently to keep the TV from moving from the top of those holes to the bottom, so the TV was moving down on the mount. What I had to do (rather than take it all down again) was to use a very short screwdriver, have someone lift the TV so that the bolts were at the TOP of the oblong holes, and then tighten those bolts as much as I could with that short screwdriver, and that did it! This is why my principal negative comment about the mount was that these holes were OBLING rather than round. The only other problem I had was with the spacers which came with the unit. There were two sizes, but neither size fitted the 6MM bolts which my TV called for. (I needed the spacers, so I managed to drilled out the holes in the smaller ones to fit my bolts. If I hadn't done this, I would not have been able to tighten those bolts even with the short screw driver.) Otherwise the mount was PERFECT for my situation, and it is working perfectly since then. Many thanks, James B. Songy Lockport, LA 70374"..."  Read more
- Jim in Lockport, LA 70374

<strong>Peerless</strong> Universal Articulating Arm for Flat Panel Screens (32" - 50" Screens) Peerless
Peerless Universal Articulating Arm for Flat Panel Screens (32" - 50" Screens)

 5 stars

This is a fantastic stand. I have a room that is very oddly shaped and needed a wall mount I could install in a particular section that could be extended and rotated in either direction. I researched this quite a bit and found this stand. It seemed like a good choice, but it was SO expensive. I searched around for the product on various sites and found it on Wayfair for nearly 1/2 the price of the other stores.[...] the product arrived with all needed pieces for assembly (comes with all types of screws for various TVs which is nice) and now that it's up - I LOVE IT. My only complaint is that it was slightly hard to install. The instructions could be a bit clearer. Also - you must have 2 people as the stand is quite heavy so you need 1 person to hold it up while the other screws it in. I HIGHLY recommend this wall mount for anyone looking for a high quality, professional wall mount."..."  Read more
- caligirlcmd in Simi Valley, CA

<strong>Peerless</strong> SmartMount Universal Tilt Mount 10" - 37" Screens Peerless
Peerless SmartMount Universal Tilt Mount 10" - 37" Screens

 4 stars

This is my 12th wall mounted flat panel in my modest 1500 sq ft home. OK, I'm a little HDTV OCD lol. Anyway, not my first mount and this was for a 32" LG LED TV for the dining room. Was going up high on the wall so needed the full 15 degrees tilt which this has. Mounting to the wall was easy. Plenty of slotted holes in the mount and I used the included lag screws to anchor to a stud. The parts that go to the TV are never that simple and this mount was no different. There were lots of screws spacers washers etc included but the ones that came with the mount were a little shorter than my liking - would have only been 3 to 4 threads of engagement to the TV - so I used the LG screws that the base was mounted with. Which of course I did not need the base. Those screws were long enough IMO so onward to mounting. I put the mounts low on the TV so the bottom of the TV would not tilt into the wall. Plenty of slotted holes to do this in the mount. I like the locking levers although they do get in the way of the mount and the TV. Just adjust them out of the way. Moral of that story is dry fit everything on the dining room table first then go to the wall with it. Summary - very good quality and engineering for the price."..."  Read more
- OCDave in Lone Star State

All TV Mounts

Related Products
The Pinpoint Mounts VM380 Flat Panel TV articulating ...
Features: Flat panel dual arm articulating mount. Finish: ...
As Dyconn's flagship product, made with the grade ...
Narrow
within All TV Mounts
 Your Search
  Special Offers
  Component Shelving Included
  Motorized
  Mounting Pattern
  Universal (57)  75MM / 100MM (31)  200MM x 100MM (19)  200MM x 200MM (15)
 400MM x 400MM
 600MM x 200MM
 600MM x 400MM
 800MM x 400MM
 Non-VESA Model Specific
  Price Range
$15$1,169

 to    GO
SPONSORED CONTENT

ServerT:0.59963798522949