Afina Contempo Basix Medicine Cabinet with FREE Magnifying Mirror - SD-R-BSX

Features:

• Basix collection
• Available in antique gold, antique silver, satin white, polished edge, or frameless
• Single door recessed medicine cabinet
• Available in the following sizes:
  • 16" W x 22" H
  • 16" W x 26" H
  • 20" W x 26" H
  • 24" W x 30" H
• Rust proof anodized aluminum interior
• Bevel front mirror
• Inside mirrored back
• Solid wood frames
• No unsightly hinges
• 3 adjustable glass shelves
• 130° + door swing opening
• Can be mounted with door opening on right or left side
• Optional surface mount with mirrored side kit
• One year warranty

Options

• Optional 5x magnifying mirror available
• Optional mirrored sides with surface mounting hardware available for surface mount

Care

• For care use a mild cleanser, applied first to a rag or paper towel
• Do not spray cleaner directly onto the mirror or frame

Installation Instructions:

• For protection during shipping glass shelves are placed inside cabinet body
• They are label marked "GLASS SHELVES" , please remove before installation
• Shelf pins are inside the cabinet in an envelope marked "SHELF PINS", remove before installation
• Cabinet body must be level and plumb upon installation
• Use a leveling instrument to ensure accuracy, or door may not close and/or secure itself properly
• When recessing, use the two pre-drilled holes (top and bottom) on each side of the cabinet interior
• Screws are not supplied

Surface Mounting Instructions

• Determine the location of the cabinet on your wall
• Draw a level horizontal line on wall at desired height for top back edge of cabinet
• Line up long thin aluminum strip (holes on the bottom) with horizontal line
• Secure strip with screws (not included). Strip must be well secured
• Insert 2 surface mount hooks (with NO holes) into back slot in the middle on the TOP of cabinet
• Slide one to each extreme (left side and right side)
• Repeat previous step with 2 surface mount hooks (WITH holes) on bottom of cabinet
• Pick up cabinet and hook the 2 Top surface mount hooks into the thin aluminum strip already mounted to the wall
• Secure the 2 Bottom surface mount hooks into the wall with screws (not included)
• Each hook must be to the extreme left and right, and properly secured
  

• PARTS INCLUDED:
  1 Thin aluminum strip with multiple holes
  2 Top surface mount hooks - with no holes
  2 Bottom surface mount hooks - with holes

If you are mounting the mirrored sides, peel off double-sided tape, align the wood strip to the back of the cabinet - making sure front is flush - and press firmly.

Important note: The door on the cabinet is off-set to one side. To make it center perfectly over your sink or vanity, it is suggested to move the rough opening width dimension 0.375" to the hinge side of the cabinet.

For more information on this product please view the specification sheet seen below.

Specification Sheet